Màn Hình Oled Ule Spi Iic 1.5inch Cho Arduino Raspberry Pi Stm32
653.000
₫ 458.000
Sản phẩm Màn Hình Oled Ule Spi Iic 1.5inch Cho Arduino Raspberry Pi Stm32 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 653.000 xuống còn ₫ 458.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
128x128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
Driver: SSD1351
Viewing angle: more than 160 degree
Operating voltage: 3.3V / 5V
Dimension: 44.5 x 37 (mm)
Interface:
Port / Description
VCC / Power (3.3~5V input)
GND / Ground
DIN / Data input
CLK / Clock data input
CS / Chip selection, low active
DC / 4-wire SPI: Data/Command selection (high for data, low for command); 3-wire SPI: Connects to GND, keeps low
RST / Reset, low active
There are two available drive interfaces for this RGB OLED ule: 4-wire SPI (default) and 3-wire SPI: BS/DC
4-wire SPI: 0, DC
3-wire SPI: 1, Connects to GND
colour: blue
Material: plastic
Package Contents:
1 x 1.5inch OLED Display ule
1 x dupond cableOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
Driver: SSD1351
Viewing angle: more than 160 degree
Operating voltage: 3.3V / 5V
Dimension: 44.5 x 37 (mm)
Interface:
Port / Description
VCC / Power (3.3~5V input)
GND / Ground
DIN / Data input
CLK / Clock data input
CS / Chip selection, low active
DC / 4-wire SPI: Data/Command selection (high for data, low for command); 3-wire SPI: Connects to GND, keeps low
RST / Reset, low active
There are two available drive interfaces for this RGB OLED ule: 4-wire SPI (default) and 3-wire SPI: BS/DC
4-wire SPI: 0, DC
3-wire SPI: 1, Connects to GND
colour: blue
Material: plastic
Package Contents:
1 x 1.5inch OLED Display ule
1 x dupond cableOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1