Makerbase STM32 3D Printer Closed Loop Stepper Motor NEMA17 MKS SERVO42B Prevent Lose Step During Printing with High Cost-Effective with Display
703.000
₫ 614.000
Sản phẩm Makerbase STM32 3D Printer Closed Loop Stepper Motor NEMA17 MKS SERVO42B Prevent Lose Step During Printing with High Cost-Effective with Display đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 703.000 xuống còn ₫ 614.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Overview
SERVO42B is a closed-loop stepper motor for market demand. The closed-loop motor uses position feedback and speed feedback to determine the phase shift that is appro priate for rotor position. When the closed-loop motor loses motion, it will feed back to the control ule, and quickly adjust the corresponding phase and speed of the motor to quickly compensate, thus preventing the motor from losing steps.This product is suit able for manufacturers with high precision requirements.
Colour: Black
Material: plastic + metal
Features
All parts are installed and debugged well, easily operate.
High-speed printing and doesn' t lose steps.
Little heat, high efficiency, more stable
Adapt STM32 chip, higher frequency, higher speed and cost-effective
Easy to install and simple structure.
Adjust parameters via display, easily operate.
closed loop motor with feedback.
Parameter
Input voltage:12V-24V
Maximum input current:2A
Closed loop Feedback frequency :6kHz
Precision:0.1125degree
Microsteps:16.32,64,128.256
Package Contents:
1pcs*SERV042B ule
1pcs* 0.9 inch 7pin OLED12864 display
1pcs*motherboard adapter
1pcs cableOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
SERVO42B is a closed-loop stepper motor for market demand. The closed-loop motor uses position feedback and speed feedback to determine the phase shift that is appro priate for rotor position. When the closed-loop motor loses motion, it will feed back to the control ule, and quickly adjust the corresponding phase and speed of the motor to quickly compensate, thus preventing the motor from losing steps.This product is suit able for manufacturers with high precision requirements.
Colour: Black
Material: plastic + metal
Features
All parts are installed and debugged well, easily operate.
High-speed printing and doesn' t lose steps.
Little heat, high efficiency, more stable
Adapt STM32 chip, higher frequency, higher speed and cost-effective
Easy to install and simple structure.
Adjust parameters via display, easily operate.
closed loop motor with feedback.
Parameter
Input voltage:12V-24V
Maximum input current:2A
Closed loop Feedback frequency :6kHz
Precision:0.1125degree
Microsteps:16.32,64,128.256
Package Contents:
1pcs*SERV042B ule
1pcs* 0.9 inch 7pin OLED12864 display
1pcs*motherboard adapter
1pcs cableOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000