Mạch Tăng Cường Dòng Điện Dc-Dc 600w Cho Arduino
216.000
₫ 128.000
Sản phẩm Mạch Tăng Cường Dòng Điện Dc-Dc 600w Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 216.000 xuống còn ₫ 128.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
The output voltage regulation: 1. adjust the CV-ADJ potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Clockwise voltage is small, counterclockwise adjustable
2. clockwise CC-ADJ potentiometer about 20 laps, the output current is set to a minimum, connected to the LED, CC-ADJ potentiometer to the required current. For battery charging, put the battery after the end of the power, then receive the output, adjust the CC-ADJ to the current you need, (for charging must be used when the battery is fully charged, because the battery left The more charge, the smaller the charge current.
Please do not use the short circuit to adjust the current, the boost ule circuit structure can not be short-circuit way to tune.
ule name: 600W boost constant current ule
ule nature: non-isolated step-up ule (BOOST)
Input voltage: DC 10V-60V
Input current: 10 (MAX)
Static operating current: 10mA (12V liters 20V, the higher the output voltage will be too much static too much)
Output voltage: 12-60V continuously adjustable
Output current: 10A MAX more than 6A please strengthen the heat (with the input and output pressure, the greater the difference in output current smaller)
Constant current range: 0.2-10A
Output power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,
Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat)
Operating frequency: 150KHz
Conversion efficiency: 92% -96% (efficiency and input, output voltage, current, pressure related)
Input reverse connection protection: no (note positive and negative do not reverse)
Installation: 4 3mm screw holes
Wiring method: wiring output
Colour: white
Material: PCB
Size: 8.5 x 5.2 x 2.1CM
Package Contents:
1 x 600W boost constant current ule
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
2. clockwise CC-ADJ potentiometer about 20 laps, the output current is set to a minimum, connected to the LED, CC-ADJ potentiometer to the required current. For battery charging, put the battery after the end of the power, then receive the output, adjust the CC-ADJ to the current you need, (for charging must be used when the battery is fully charged, because the battery left The more charge, the smaller the charge current.
Please do not use the short circuit to adjust the current, the boost ule circuit structure can not be short-circuit way to tune.
ule name: 600W boost constant current ule
ule nature: non-isolated step-up ule (BOOST)
Input voltage: DC 10V-60V
Input current: 10 (MAX)
Static operating current: 10mA (12V liters 20V, the higher the output voltage will be too much static too much)
Output voltage: 12-60V continuously adjustable
Output current: 10A MAX more than 6A please strengthen the heat (with the input and output pressure, the greater the difference in output current smaller)
Constant current range: 0.2-10A
Output power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V * 10A = 1360W, input 60V * 10A = 600W,
Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat)
Operating frequency: 150KHz
Conversion efficiency: 92% -96% (efficiency and input, output voltage, current, pressure related)
Input reverse connection protection: no (note positive and negative do not reverse)
Installation: 4 3mm screw holes
Wiring method: wiring output
Colour: white
Material: PCB
Size: 8.5 x 5.2 x 2.1CM
Package Contents:
1 x 600W boost constant current ule
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000