Mạch Tăng Áp 250w 6a Cho Đèn Led
135.000
₫ 93.000
Sản phẩm Mạch Tăng Áp 250w 6a Cho Đèn Led đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 135.000 xuống còn ₫ 93.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to rriioo
We offer the highest discount
Follow us and get coupons
Our shop has a rich variety of products, affordable prices and good quality
Don't miss us, come and buy! ! !
If you have any questions, please contact us
Features:
1. Constant output voltage/current, continuously adjustable.
2. High conversion efficiency up to 96%.
3. High power electronic components, stable and reliable.
4. Adopt aluminum substrate PCB with good thermal conductivity.
5. Mainly used for LED drive, DIY power supply, car power supply, solar charging power supply, battery charging, etc.
Specification:
Input Voltage: DC 10-40V
Input Current: 6A Max
Static Working Current: 10mA
Output Voltage: DC 10-50V continuously adjustable
Output Current: 6A Max (decreases as the voltage difference between input and output increases, please enhance heat dissipation when over 4A)
Constant Current Range: 0.2-6A
Output Power: Input voltage x 6A
Working Frequency: 150kHz
Conversion Efficiency: 92%-96%
Input Reverse Connection Protection: Support
Operating Temperature: -40~85℃
Module Size: 70*36*13mm / 2.7*1.4*5.1in
Weight: Approx. 64g/2.2oz
Output Voltage Regulation:
Adjust the RV1 potentiometer and set the output voltage to your desired voltage according to your battery or LED.
Output Current Regulation:
Turn the RV2 potentiometer clockwise for about 30 turns to set the output current to the minimum value and connect it to the LED, adjust RV2 potentiometer to the required current. For charging the battery, connect the output after discharging the battery, then adjust the RV2 to the current you need.
Package List:
1 * Step-Up Power Supply
Note:
1. The input/output voltage and current must not exceed the maximum value during operation to avoid damage to the power supply.
2. Pay attention to ventilation and heat dissipation when working for a long time to extend the service life of the power supp
We offer the highest discount
Follow us and get coupons
Our shop has a rich variety of products, affordable prices and good quality
Don't miss us, come and buy! ! !
If you have any questions, please contact us
Features:
1. Constant output voltage/current, continuously adjustable.
2. High conversion efficiency up to 96%.
3. High power electronic components, stable and reliable.
4. Adopt aluminum substrate PCB with good thermal conductivity.
5. Mainly used for LED drive, DIY power supply, car power supply, solar charging power supply, battery charging, etc.
Specification:
Input Voltage: DC 10-40V
Input Current: 6A Max
Static Working Current: 10mA
Output Voltage: DC 10-50V continuously adjustable
Output Current: 6A Max (decreases as the voltage difference between input and output increases, please enhance heat dissipation when over 4A)
Constant Current Range: 0.2-6A
Output Power: Input voltage x 6A
Working Frequency: 150kHz
Conversion Efficiency: 92%-96%
Input Reverse Connection Protection: Support
Operating Temperature: -40~85℃
Module Size: 70*36*13mm / 2.7*1.4*5.1in
Weight: Approx. 64g/2.2oz
Output Voltage Regulation:
Adjust the RV1 potentiometer and set the output voltage to your desired voltage according to your battery or LED.
Output Current Regulation:
Turn the RV2 potentiometer clockwise for about 30 turns to set the output current to the minimum value and connect it to the LED, adjust RV2 potentiometer to the required current. For charging the battery, connect the output after discharging the battery, then adjust the RV2 to the current you need.
Package List:
1 * Step-Up Power Supply
Note:
1. The input/output voltage and current must not exceed the maximum value during operation to avoid damage to the power supply.
2. Pay attention to ventilation and heat dissipation when working for a long time to extend the service life of the power supp