Mạch Hạ Áp Eplbs 300w Dc-Dc 20a
155.000
₫ 108.500
Sản phẩm Mạch Hạ Áp Eplbs 300w Dc-Dc 20a đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 155.000 xuống còn ₫ 108.500, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
⭐- ⭐- ⭐- ⭐ Welcome to my shop ⭐-⭐-⭐-⭐
Decription:
Features:
Scope of application: high power LED constant current drive, battery charging (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, battery pack charging, solar panels, wind turbines
Input voltage: 6-40VDC
Output voltage: continuously adjustable (1.2-35VDC) for longer than 32V (applicable for applications where the input voltage is higher than the output voltage cannot be boosted)
Output current: maximum 20A for 15A for a long time (power tube temperature exceeds 65 degrees, please add fan cooling, high voltage output, please derate)
Current limiting range: 0.2-20A (adjustment) module over 65 degrees, please add a fan.
The lowest voltage difference: 3V
Working frequency: 150KHZ
Conversion efficiency: up to about 96% Efficiency is related to pressure difference and usage environment
Output ripple: Ripple around 50mV (no noise) 20M bandwidth (for reference only) Input 24V measured
Working temperature: -10 to +75 Celsius) (Please pay attention to the power tube temperature for actual use. If the temperature is too high, please use heat dissipation or derating)
Potentiometer adjustment direction: clockwise (increase), counterclockwise (decrease)
Output short circuit protection: There is (instantaneous protection) constant current (current constant current value cannot be short-circuited for a long time)
Input reverse connection protection: none,
Output anti-reverse perfusion: None, for the load self-charged or inductive load requires an external diode,
Wiring method: terminal block
Module size: 60*53*30MM
Included:
1 x M
Decription:
Features:
Scope of application: high power LED constant current drive, battery charging (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, battery pack charging, solar panels, wind turbines
Input voltage: 6-40VDC
Output voltage: continuously adjustable (1.2-35VDC) for longer than 32V (applicable for applications where the input voltage is higher than the output voltage cannot be boosted)
Output current: maximum 20A for 15A for a long time (power tube temperature exceeds 65 degrees, please add fan cooling, high voltage output, please derate)
Current limiting range: 0.2-20A (adjustment) module over 65 degrees, please add a fan.
The lowest voltage difference: 3V
Working frequency: 150KHZ
Conversion efficiency: up to about 96% Efficiency is related to pressure difference and usage environment
Output ripple: Ripple around 50mV (no noise) 20M bandwidth (for reference only) Input 24V measured
Working temperature: -10 to +75 Celsius) (Please pay attention to the power tube temperature for actual use. If the temperature is too high, please use heat dissipation or derating)
Potentiometer adjustment direction: clockwise (increase), counterclockwise (decrease)
Output short circuit protection: There is (instantaneous protection) constant current (current constant current value cannot be short-circuited for a long time)
Input reverse connection protection: none,
Output anti-reverse perfusion: None, for the load self-charged or inductive load requires an external diode,
Wiring method: terminal block
Module size: 60*53*30MM
Included:
1 x M