Mạch Hạ Áp Dc-dc 10a
162.700
₫ 104.900
Sản phẩm Mạch Hạ Áp Dc-dc 10a đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 162.700 xuống còn ₫ 104.900, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Dc-dc 10a leds
Characteristics:
With your own radiator, can meet normal use. It is recommended that use not exceeding 10a for extended periods.
When the temperature of the power tube exceeds 65 degrees, please add a fan to dissipate heat. Usually, in 24v to 12v, fans are not required in an open environment of 6a.
Large terminals, security of use, upper and lower contact combinations, connection loads are safer and reliable.
Adjustable potentiometer, turn clockwise to increase voltage, turn counterclockwise to reduce voltage.
Copper core inductance is larger, inductive coils are affected by ac current limit, a high-pass or low pass filter consisting of resistance or capacitor, phase shift circuit and resonant circuit, direct current, resistance ac power.
High integration ic control chip, make the reduction voltage use more stable and reliable.
Usage of battery charging:
- ensure that the charged voltage and charging current of floating batteries and the input voltage required for charging b batteries.
- adjust the constant voltage potentiometer to adjust the output voltage to about 5 v.
- use multimeter 10a current g-auge stop measuring output short circuit current.
- connect the battery and test charge.
Usage of led constant current drive:
- determine the working current and maximum working voltage of the led you need to drive
- adjust the constant voltage potentiometer to adjust the output voltage to about 5v
- measurement of output short circuit current using multimeter 10a current module, and adjust the constant current potentiometer to bring the current up to the predetermined working current of the led
- adjust the constant voltage potentiometer to the maximum working voltage of led
- connect leds and test machines
Specifications:
Type of project: Power module
Scope of application: High power led constant current drive, lithium b (Including ferroelectric power) 4v, 6v, 12v, 24v b, solar panels, wind turbines, etc.
Input voltage: 7-32v (Unsteady current 5-32v)
Output voltage: Continuous adjustable (0.8-28v)
Constant current range: 0.2-10a (Adjustable) (There is no constant flow)
Low pressure difference: 1v
Switch frequency: 180khz
Output power: The maximum power is about 300 w. If the power tube temperature exceeds 65 degrees, fans, please
Conversion efficiency: Up to 95% (Higher output voltage, the more efficient)
Packing weight: 65g/2.29oz
Packaging size: 65x47 x 23.5mm/2.55x1.85x0.92 inches
Packing list:
1 x m
Characteristics:
With your own radiator, can meet normal use. It is recommended that use not exceeding 10a for extended periods.
When the temperature of the power tube exceeds 65 degrees, please add a fan to dissipate heat. Usually, in 24v to 12v, fans are not required in an open environment of 6a.
Large terminals, security of use, upper and lower contact combinations, connection loads are safer and reliable.
Adjustable potentiometer, turn clockwise to increase voltage, turn counterclockwise to reduce voltage.
Copper core inductance is larger, inductive coils are affected by ac current limit, a high-pass or low pass filter consisting of resistance or capacitor, phase shift circuit and resonant circuit, direct current, resistance ac power.
High integration ic control chip, make the reduction voltage use more stable and reliable.
Usage of battery charging:
- ensure that the charged voltage and charging current of floating batteries and the input voltage required for charging b batteries.
- adjust the constant voltage potentiometer to adjust the output voltage to about 5 v.
- use multimeter 10a current g-auge stop measuring output short circuit current.
- connect the battery and test charge.
Usage of led constant current drive:
- determine the working current and maximum working voltage of the led you need to drive
- adjust the constant voltage potentiometer to adjust the output voltage to about 5v
- measurement of output short circuit current using multimeter 10a current module, and adjust the constant current potentiometer to bring the current up to the predetermined working current of the led
- adjust the constant voltage potentiometer to the maximum working voltage of led
- connect leds and test machines
Specifications:
Type of project: Power module
Scope of application: High power led constant current drive, lithium b (Including ferroelectric power) 4v, 6v, 12v, 24v b, solar panels, wind turbines, etc.
Input voltage: 7-32v (Unsteady current 5-32v)
Output voltage: Continuous adjustable (0.8-28v)
Constant current range: 0.2-10a (Adjustable) (There is no constant flow)
Low pressure difference: 1v
Switch frequency: 180khz
Output power: The maximum power is about 300 w. If the power tube temperature exceeds 65 degrees, fans, please
Conversion efficiency: Up to 95% (Higher output voltage, the more efficient)
Packing weight: 65g/2.29oz
Packaging size: 65x47 x 23.5mm/2.55x1.85x0.92 inches
Packing list:
1 x m
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000