☆M.2 NVME SSD Convert Adapter Card for MacBook Air Pro Retina 2013-2017 NVME/AHCI SSD Kit for A1465 A1466 A1398 A1502
70.000
₫ 59.000
Sản phẩm ☆M.2 NVME SSD Convert Adapter Card for MacBook Air Pro Retina 2013-2017 NVME/AHCI SSD Kit for A1465 A1466 A1398 A1502 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 70.000 xuống còn ₫ 59.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
This M.2 PCIe nVME SSD convert adapter allows to upgrade SSD for 2013-2015 MacBook with large capacity NVME SSD.
It is compatible with MacBook Air 11 inch A1465 & MacBook Air 13 inch A1466 (Mid 2013-2017), MacBook Pro (Retina) 13 inch A1502 & 15 inch A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
Requires macOS 10.13 High Sierra or Later; DO NOT compatible with earlier than macOS 10.13 versions. Please use your SSD to upgrades your macOS before installation.
Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO (Not support 960 EVO Plus), WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on.
It can't support recovering from internet, important to prepare bootable USB disk driver(M.2 PCIe has no OS systerm inside,it must be erased first).
Type:Cable Adapter
How to use:
1. Make sure to install the High Sierra on your old drive, so that a newer firmware is installed that can handle NVME.
2. For your old driver, please do a full backup via Time Machine.
3. Create a High Sierra Installer on a bootable USB stick.
4. Open the macbook and disconnect the battery while switching out the drive and make sure both adapter and new SSD sit snug.
5. Reconnect the battery before closing the shell.
6. Insert the Installer USB stick from step 2, and press the option key while the machine starts.
7. Finally, once it's up you can now go to the disk utils to format and install the MAC OS.?
Notice:
1. You are kindly reminded that macOS failed on resume from hibernating with some NVME SSDs of some brands. Have to turn off laptop all the time instead of close the lid and go.
2. Please insert our adapter fully into SSD slot and you must prepare bootable USB disk(see third point) with High Sierra to format M.2 SSD first, it can't support recover from internet.3. There are many customers can use it, so we suggest you to try it again if your MAC can't detect nVME SSD.
colour:black
Material:PCB
Size:25*90mm
Package Contents:
1 * Adapter card
1* screw set & driver
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
It is compatible with MacBook Air 11 inch A1465 & MacBook Air 13 inch A1466 (Mid 2013-2017), MacBook Pro (Retina) 13 inch A1502 & 15 inch A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
Requires macOS 10.13 High Sierra or Later; DO NOT compatible with earlier than macOS 10.13 versions. Please use your SSD to upgrades your macOS before installation.
Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO (Not support 960 EVO Plus), WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on.
It can't support recovering from internet, important to prepare bootable USB disk driver(M.2 PCIe has no OS systerm inside,it must be erased first).
Type:Cable Adapter
How to use:
1. Make sure to install the High Sierra on your old drive, so that a newer firmware is installed that can handle NVME.
2. For your old driver, please do a full backup via Time Machine.
3. Create a High Sierra Installer on a bootable USB stick.
4. Open the macbook and disconnect the battery while switching out the drive and make sure both adapter and new SSD sit snug.
5. Reconnect the battery before closing the shell.
6. Insert the Installer USB stick from step 2, and press the option key while the machine starts.
7. Finally, once it's up you can now go to the disk utils to format and install the MAC OS.?
Notice:
1. You are kindly reminded that macOS failed on resume from hibernating with some NVME SSDs of some brands. Have to turn off laptop all the time instead of close the lid and go.
2. Please insert our adapter fully into SSD slot and you must prepare bootable USB disk(see third point) with High Sierra to format M.2 SSD first, it can't support recover from internet.3. There are many customers can use it, so we suggest you to try it again if your MAC can't detect nVME SSD.
colour:black
Material:PCB
Size:25*90mm
Package Contents:
1 * Adapter card
1* screw set & driver
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1