Logo 4d Gắn Xe Hơi Vw Cc Bora Tiguan Golf 6 Chất Lượng Cao

Item specifics
Brand Name:LiplastingItem Type:Atmosphere Lamp
Product Description
[size] diameter 11cm
[color] red white blue
[Power] DC12V+/-10%
[Wiring length] 0.6 meters
[power] 2 (W)
[Voltage] 12 (V)
[current] 0.1 (A)
[Tools prepared before installation]
 Please prepare the following tools before starting:
1. Flat-head screwdriver
2. Phillips screwdriver
3. Insulating tape
4. Towel
5. Pliers

【Installation Notes】
     1. First place a towel next to the tailgate logo, use a flat-blade screwdriver to shake the logo, and towel to prevent scratching the body
        2. Pay attention to peeling off the double-sided rubber first. When the squatting is moderate, don't be too fierce. After a little bit, slowly squat down, clean the car logo and the double-sided tape on the body.
        3. Use a Phillips screwdriver to remove the partition inside the tail box. Note that there are clips in some places. Be careful to remove the baffles to see the various lines.
        4. Now install the car standard light, the car standard light power line passes through one of the car standard positioning holes, and wears the single-sided glue on the back of the car standard light inside the car box. While pulling the wire, the car mark light is glued to the vehicle body, and the pressure is pressed. tight.
     5. The car light is installed and is now connected to the power supply. The car light should be connected to the light source of the license plate, so that when the night light is turned on, the car light will be turned on at the same time, and the power connector of the rear license plate light is found.
        6. Unplug the plug first, strip each of the positive and negative poles to expose the wire core, press red to red, black to black to connect the wire, don't forget to wrap it with insulating tape, and finally plug the plug back! Replace the tailgate cover.
【Features】:
    1. The appearance of this product is consistent with the original car standard, and it can be directly replaced by the original car standard when installed in the car tail box. Its special vacuum plating technology not only ensures the same gloss as the original logo, but also ensures high transparency and uniform brightness.
      2. It adopts high-quality LED lamp set, featuring high brightness and long service life. It is specially designed to be waterproof and dustproof, ensuring long-term use.
      3. This product is specially designed for car modification enthusiasts. When the daytime car light is not bright, there is no difference with the original car standard. When the night license plate lighting is turned on, the LED car light will also light up, making the car Marked in the night to become dazzling, rich in future technology, highlighting the noble blood of your car.
      4. The LED light inside is specially waterproof and dustproof! LED lamps have a lifespan of up to 100,000 h