Linh kiện Fpts2797 cho máy in Canon MP237 T08
₫ 72.500
Sản phẩm Linh kiện Fpts2797 cho máy in Canon MP237 T08 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
No.
All ic eprom, ic eeprom, ic reset, ic counter are adjusted and are confirmed to work 100%.
New eprom canon mp237, ic eprom reset mp237, ic counter mp237, ic eeprom mp237 canon new model t08
Condition eprom mp237:
New
Already programd
100% tested and running normally
Eprom mp237 support for printer:
Canon e400 new model t08
Car mount ic eprom mp237:
Ice cream feet with flux
Soldering iron iron iron tip tip ic, Make sure the tin fuses with the ic feet., This is done because the ic leg has never been hit by tin.
Installl ic to the board according to its position, don 't reverse
Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x
Hot ic can be damaged and blink 9x too
Please be careful when removing the ic, Because if too hot a blower is used, the other components are damaged, causing the mainboard to fail or the pcb path to brea
All ic eprom, ic eeprom, ic reset, ic counter are adjusted and are confirmed to work 100%.
New eprom canon mp237, ic eprom reset mp237, ic counter mp237, ic eeprom mp237 canon new model t08
Condition eprom mp237:
New
Already programd
100% tested and running normally
Eprom mp237 support for printer:
Canon e400 new model t08
Car mount ic eprom mp237:
Ice cream feet with flux
Soldering iron iron iron tip tip ic, Make sure the tin fuses with the ic feet., This is done because the ic leg has never been hit by tin.
Installl ic to the board according to its position, don 't reverse
Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x
Hot ic can be damaged and blink 9x too
Please be careful when removing the ic, Because if too hot a blower is used, the other components are damaged, causing the mainboard to fail or the pcb path to brea