Linh Kiện Điện Tử Max30102 Max30100 Cho Arduino Max30100
₫ 44.853
Sản phẩm Linh Kiện Điện Tử Max30102 Max30100 Cho Arduino Max30100 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
MAX30100 Description:
Heart Rate click carries Maxim's MAX30100 integrated pulse oximetry and heart-rate sensor. It's an optical sensor that derives its readings
from emitting two wavelengths of light from two LEDs - a red and an infrared one - then measuring the absorbance of pulsing blood through a
photodetector. This particular LED color combination is optimized for reading the data through the tip of one's finger. The signal is
processed by a low-noise analog signal processing unit and communicated to the target MCU through the mikroBUS I2C interface. Developers of
end-user applications should note that the readings can be negatively impacted by excess motion and changes in temperature. Also, too much
pressure can constrict capillary blood flow and therefore diminish the reliability of the data. A programmable INT pin is also available. Uses
3.3V power supply.
Key features:
Optical sensor: IR and red LED combined with photodetector
Measures absorbance of pulsing blood
I2C interface plus INT pin
3.3V power supply
Key Benefits:
Motion artefact resillence
Ambient light cancellation
Ready-to-use examples save development time
Supported in all MikroElektronika compilers
Applications
Developing algorithms for pulse oximetry and heart rate readings through the tip of a finger.
MAX30102 Description:
Optical Heart-Rate Monitor and Pulse Oximetry Solution
Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
Low Power
Device Drivers
Free Algorithm
Example C Source Code For Ard uino And mbed Platforms
Test Data
Competitive Advantages
Highly-integrated, small-size sensor
Non-chest based heart-rate/SpO2 detection
Ultra-low power consumption
Applications:
Wearables
Heart-rate monitor
Pulse oxi
Heart Rate click carries Maxim's MAX30100 integrated pulse oximetry and heart-rate sensor. It's an optical sensor that derives its readings
from emitting two wavelengths of light from two LEDs - a red and an infrared one - then measuring the absorbance of pulsing blood through a
photodetector. This particular LED color combination is optimized for reading the data through the tip of one's finger. The signal is
processed by a low-noise analog signal processing unit and communicated to the target MCU through the mikroBUS I2C interface. Developers of
end-user applications should note that the readings can be negatively impacted by excess motion and changes in temperature. Also, too much
pressure can constrict capillary blood flow and therefore diminish the reliability of the data. A programmable INT pin is also available. Uses
3.3V power supply.
Key features:
Optical sensor: IR and red LED combined with photodetector
Measures absorbance of pulsing blood
I2C interface plus INT pin
3.3V power supply
Key Benefits:
Motion artefact resillence
Ambient light cancellation
Ready-to-use examples save development time
Supported in all MikroElektronika compilers
Applications
Developing algorithms for pulse oximetry and heart rate readings through the tip of a finger.
MAX30102 Description:
Optical Heart-Rate Monitor and Pulse Oximetry Solution
Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
Low Power
Device Drivers
Free Algorithm
Example C Source Code For Ard uino And mbed Platforms
Test Data
Competitive Advantages
Highly-integrated, small-size sensor
Non-chest based heart-rate/SpO2 detection
Ultra-low power consumption
Applications:
Wearables
Heart-rate monitor
Pulse oxi
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000