LANFY 30cm*152cm 5D Carbon Fiber Stickers Easy To Clean Auto Decoration Car Film Sticker Wrap Change Color Vinyl High Gloss Texture Protective Films

Color:High Gloss Black
Application:Rear view mirror,computer,mobile phone,car,bicycle ,motorcycle,furniture and so on.
Type:5D Carbon Fiber Stickers
Package Includes:1pc 5D Carbon Fiber Sticker
Size:30cm*152cm
Features:Waterproof, sunscreen, smooth surface, strong stretchability and durability.
Instructions:
First,
Dry Pasted Method:Suitable for cars, motorcycles or small cars
Use tools: clean rags, scrapers or credit cards
1. Clean the paste position of the car body. If it is conditional, use a cloth without fiber loss to scrub with 50% alcohol or isopropyl alcohol or acetone. You can also use soapy water. The solvent-cleaned surface needs to be solvent evaporated before it can be pasted. .
2. Under normal circumstances, slowly stick the side, use the tool to flatten, and uncover the bottom paper.
3, if the car stickers are less than 10 cm in length and width, you can tear off all the stickers and paste them. However, care must be taken not to accidentally stick or drop the ground to stick dust.
4. Use a clean rag or scraper [such as a calling card or credit card] to rub or scrape repeatedly on the membrane until there is no bubble in the sticker.

Second,
Wet Pasted Method:Suitable for cars or large cars (recommended for double operation)
Use tools: watering can, clean rag, scraper, utility knife, air duct
1. Clean the surface to be pasted. Before preparing the paper, spray the glass water evenly on the surface to be pasted (after cleaning the body, spray water on the body part to be attached) - mainly to reduce the viscosity of the sticker. Easy to adjust the position.
2. After confirming the position to be attached, lift the side from the right to the left with the car sticker [or from top to bottom] and press it on the car with a rag, then flatten it with a rag and lie on one side. Uncover the bottom paper.
3. When encountering the door handle or anti-collision strip, the material should be cut and wrapped or loaded according to the situation.
4. Adjust in time, after the general position of the figure is determined, use the scraper to repeatedly scrape off the water and air bubbles, and use the scraper to scrape from right to left.
5. In the case of the door and the seam, use the utility knife to divide it and spread it inward.
6, try to make the water in the car stickers dry, conditional heating can be moderately heated with a fan.

Recommendation:
Try not to expose to the sun within 24 hours, and do not wash the car within 48 hours.