Kính cường lực chống trầy cho HP ITEL A14 / A15 / A16 / A25 DS / A25 / A26 / A32F / A33

Can you just REQUES for cell phone TYPE?


Still remember the same one called Tempered Glass?
The ancient screen protector is the window on the screen makes a thin phone feel like a thick old phone, especially when it 's front and back. It 's hard to break a little bit, sometimes it' s cracked, it 's hard to break. The sensitivity of the screen doesn 't have to say the same thing as the old touch screen phone. It 's not like it' s making the screen hard to read on the outside.

Surely toppers has forgotten the ancient technology because now there are Hydro-Gel Screen protectors whose excesses are sbb:

- flexibility with a curved screen.
- thin berets will be gone in less than 48 hours
- easy to installl, if there 's a bubble it' ll disappear itself in less than 24 hours.
- thin is only 0.2mm. The screen stays sensitive.
- the surface of the screen is a little soft, touch / swipe is better.

Installlation tips: Phase 1
- clean the screen with a lap, help with a little alcohol if the screen is so dirty or greasy.
- open up a bit of protective cover that says 1 BACK at one end first, then adjust to the tip of the phone screen.
- stick it at the end of ybs, then while the shield is opened little by little, stick it towards the other end with a card.
- once it 's installled all take off the outer layer that says 2 fronts

Stage 2 installlation tips

-. Clean the screen using the wet tissue provided.
-. Clean the Dust on the screen with Dust Absorber Sticker
If it feels clean enough and no dust is attached, proceed to the next stage.
-. Take the VIVAN Hydrogel, and open the white lining behind,
-. The precision of the Hydrogel on the screen, once squeezed already precision, goes to the next stage.
-. Open 1 side top / bottom (1 side only first), lift the top / bottom side until the hydrogel cleavage layer is visible.
-. Push and press the side that opened with the Scrup provided, and then do it on the other side.
- push and press it slowly all over the hydrogel that 's attached to the screen, if it' s enough, go on to the next stage.
-. Open the top layer of Hydrogel slowly.
-. Clean it with the soft cloth provided.
-. Done

For easier ways to see on yo