Kính Cường Lực Full Keo UV Dành Cho Samsung Galaxy S20 Ultra S10 S9 S8 Plus S10E Note 8 9 10
70.200
₫ 43.000
Sản phẩm Kính Cường Lực Full Keo UV Dành Cho Samsung Galaxy S20 Ultra S10 S9 S8 Plus S10E Note 8 9 10 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 70.200 xuống còn ₫ 43.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
1.9H hardness and anti scratch(0.33mm)
2.Glass is whole transparent and no black border, will show HD display
3.Qleophobic coating will make it anti fingerprint and touch smoothly
4.As it is full glue screen protector , it will not have any touch issues
5.Safe Packing by Foam box or Retail Box
How to install the uv glass
Step1:Begin by cleaning your screen with wet and dry wips,then removing any case from your phone.
Step2:Remove the white cover of the tube,then use a knife or scissor cut a small hole.
Step3:Rotate the small cap of the tube clockwise and the liquid glue will come out antomatically,
Make the liquid glue on the screen in a long line,like the picture(It is recommended that the glue be poured completely.The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air).
Step4:Peel off the mask film from the screen protector.
Step5:Place the screen protector on your phone SLOWLY,the glue will spread evenly on the whole screen.
Never use fingers to press the middle of the screen after placing the screen protector.
Step6:Remove small tape,use the UV Light to dry the glue,we suggest one place per 1min(Light time: At least 3 minutes,Divide the screen into three parts: head, middle and bottom. per partial light 1 minute to make sure the uv glue was dry) also You can still adjust the angle of the glass before use the lamp if you think it's not in best position,if there is glue spilling
on the left or right sides,you can use dry cloth to adsorb the extra glue.
Step7 : Clear the screen and turn off the UV light for reuse.
Package included:
1×Transparent Tempered Screen Protector
1×Nano Liquid adhesive
1×Cleaning Kits
1×Small UV
1.9H hardness and anti scratch(0.33mm)
2.Glass is whole transparent and no black border, will show HD display
3.Qleophobic coating will make it anti fingerprint and touch smoothly
4.As it is full glue screen protector , it will not have any touch issues
5.Safe Packing by Foam box or Retail Box
How to install the uv glass
Step1:Begin by cleaning your screen with wet and dry wips,then removing any case from your phone.
Step2:Remove the white cover of the tube,then use a knife or scissor cut a small hole.
Step3:Rotate the small cap of the tube clockwise and the liquid glue will come out antomatically,
Make the liquid glue on the screen in a long line,like the picture(It is recommended that the glue be poured completely.The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air).
Step4:Peel off the mask film from the screen protector.
Step5:Place the screen protector on your phone SLOWLY,the glue will spread evenly on the whole screen.
Never use fingers to press the middle of the screen after placing the screen protector.
Step6:Remove small tape,use the UV Light to dry the glue,we suggest one place per 1min(Light time: At least 3 minutes,Divide the screen into three parts: head, middle and bottom. per partial light 1 minute to make sure the uv glue was dry) also You can still adjust the angle of the glass before use the lamp if you think it's not in best position,if there is glue spilling
on the left or right sides,you can use dry cloth to adsorb the extra glue.
Step7 : Clear the screen and turn off the UV light for reuse.
Package included:
1×Transparent Tempered Screen Protector
1×Nano Liquid adhesive
1×Cleaning Kits
1×Small UV