Kính Cường Lực Bảo Vệ Màn Hình Cho Samsung Galaxy S21 Ultra S21
29.210
₫ 14.605
Sản phẩm Kính Cường Lực Bảo Vệ Màn Hình Cho Samsung Galaxy S21 Ultra S21 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 29.210 xuống còn ₫ 14.605, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
package included:
(1* protector 1*UV Glue 1*UV lamp)
or package included:
(2* protector 2*UV Glue 1*UV lamp)
or package included:
only one
How to instal
(Reference installation picture before you instal it)
Step 1 : Clean the screen with the wet wipe and cloth and removing any case from you phone
Step 2 : use a knife or scissor open the liquid adhesive box,drop it on the screen(It is recommended that the glue be poured completely.The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air. )
Step 3 : Peel off the mask film from the glass,then place the screen protector to a suitable position on your device SLOWLY. PLEASE DO NOT LIFT AND PRESS THE GLASS TO LET THE ADHESIVE SPREAD,JUST LET IT AUTOMATIC DISPERSION.(Very important)
Step 4 : Wait for about half a minute to let the adhesive spread and level.
Step 5 : If the adhesive overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone's tempered film, the lamp was turned back and forth several times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
Irradiate the mobile phone under UV lamp and need to illuminate twice for about 5 minutes to reach the fully-cured position.
Clear the screen,and turn off the UV lamp for
(1* protector 1*UV Glue 1*UV lamp)
or package included:
(2* protector 2*UV Glue 1*UV lamp)
or package included:
only one
How to instal
(Reference installation picture before you instal it)
Step 1 : Clean the screen with the wet wipe and cloth and removing any case from you phone
Step 2 : use a knife or scissor open the liquid adhesive box,drop it on the screen(It is recommended that the glue be poured completely.The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air. )
Step 3 : Peel off the mask film from the glass,then place the screen protector to a suitable position on your device SLOWLY. PLEASE DO NOT LIFT AND PRESS THE GLASS TO LET THE ADHESIVE SPREAD,JUST LET IT AUTOMATIC DISPERSION.(Very important)
Step 4 : Wait for about half a minute to let the adhesive spread and level.
Step 5 : If the adhesive overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone's tempered film, the lamp was turned back and forth several times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
Irradiate the mobile phone under UV lamp and need to illuminate twice for about 5 minutes to reach the fully-cured position.
Clear the screen,and turn off the UV lamp for
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000