UV Kính Cường Lực Bảo Vệ Màn Hình Cao Cấp Cho Samsung Galaxy Note 20 10 9 8 S20 S10 5g 4g S9 S8 Ultra Plus S7 Edge
58.333
₫ 35.000
Sản phẩm UV Kính Cường Lực Bảo Vệ Màn Hình Cao Cấp Cho Samsung Galaxy Note 20 10 9 8 S20 S10 5g 4g S9 S8 Ultra Plus S7 Edge đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 58.333 xuống còn ₫ 35.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,2 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
• We Discounts in progress, please follow the shop.Confirm order within 1days , 5-15 days receive your purchase.
To ensure the quality , all of orders will be inspected by ourself .If there are any defectives and damages ,please let we know at first time ,please do not directly give us bad rate ,we will give you a best solution within 1 day .
It should take more patient to install the glass protector:
Step 1 : Clean the screen with the wet wipe and cloth and removing any case from you phone
Step 2 : Stick the key hole with a label,and then use a knife or scissor open the liquid adhesive box,drop it on the screen(It is recommended that the glue be poured completely.The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air. )
Step 3 : Peel off the mask film from the glass,then place the screen protector to a suitable position on your device SLOWLY. PLEASE DO NOT LIFT AND PRESS THE GLASS TO LET THE ADHESIVE SPREAD,JUST LET IT AUTOMATIC DISPERSION.(Very important)
Step 4 : Wait for about half a minute to let the adhesive spread and level.
Step 5 : If the adhesive overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone's tempered film, the lamp was turned back and forth several times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
Step 6 : Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
Step 7 : Irradiate the mobile phone under UV lamp and need to illuminate twice for about 3 minutes to reach the fully-cured position.
Step 8 : Clear the screen,and turn off the UV lamp for reuse.
Item Name: Screen Protector
Material: Tempered Glass
Note: Due to the light and screen setting difference, the items color may be slightly different from the pictures.
Package Includes:
1 x Nano Water Glass
To ensure the quality , all of orders will be inspected by ourself .If there are any defectives and damages ,please let we know at first time ,please do not directly give us bad rate ,we will give you a best solution within 1 day .
It should take more patient to install the glass protector:
Step 1 : Clean the screen with the wet wipe and cloth and removing any case from you phone
Step 2 : Stick the key hole with a label,and then use a knife or scissor open the liquid adhesive box,drop it on the screen(It is recommended that the glue be poured completely.The glue that drops on the screen can't have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air. )
Step 3 : Peel off the mask film from the glass,then place the screen protector to a suitable position on your device SLOWLY. PLEASE DO NOT LIFT AND PRESS THE GLASS TO LET THE ADHESIVE SPREAD,JUST LET IT AUTOMATIC DISPERSION.(Very important)
Step 4 : Wait for about half a minute to let the adhesive spread and level.
Step 5 : If the adhesive overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone's tempered film, the lamp was turned back and forth several times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
Step 6 : Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
Step 7 : Irradiate the mobile phone under UV lamp and need to illuminate twice for about 3 minutes to reach the fully-cured position.
Step 8 : Clear the screen,and turn off the UV lamp for reuse.
Item Name: Screen Protector
Material: Tempered Glass
Note: Due to the light and screen setting difference, the items color may be slightly different from the pictures.
Package Includes:
1 x Nano Water Glass