Khuôn Silicone Làm Chậu Cây Xương Rồng Mini

Product size: as shown in figure

Steps for the production of aroma gypsum:
1: preparation of 100g gypsum powder, 35g water (30-35 g)
Water is all right)
- pour water into gypsum and stir it quickly and evenly.
- stir the plaster into the mold.
- shake the mold up and down, drain bubbles, and scrape off the surface with a scraping board.
- can be demodeled in about 30-60 minutes.
- can be polished, oil drip, color, and decorated after demodeling.


Aroma candle making method
- first, place raw materials (i.e. crayons, wax beeswax, etc.) in insulated containers and heat them in water.Don'T let water contact raw materials, and when made with pure white paraffin and hope the final candle color, then put the crayon crumbs into the dye.
- pour the gradually melted wax into the model and place it together in the lamp-core. this time, you can drip the essential oil and mix it evenly.
- if you want a candle with a gradient color like a cocktail, just wait until the candle has solidified and poured into a new layer.
- when the material is completely cooled and solidified, it will be a great deal of effort to pull the core into the right length.
(Wax selection techniques: aromatherapy candles, wax sheet materials temperature below 15 degrees celsius, recommended for use with ice wax or beeswax to prevent cracking.)


Cement production curriculum
1: mix well with cement, water, quartz sand, pour over mold, cool day, dry, and dry in demoderation.
2: super strong cement+water or cement+water
3: pure cement+quartz sand+water OR pure cement+fine sand+water
4: if you want to have a color planter, add iron oxide pigment and iron oxide with whatever color you like
5: gypsum can also be, mixing with gypsum+water to fill the mold in three hours dry, can be color-painted or painted at will.
6: the mixing ratio varies from person to person.1: 1 or 2.5: 1 or 3: 1
7: the cement is filled with mold, need to cool day and night, feel whether it's dry, thoroughly dry, and turn over the wall thickness of the surrounding, gently drag out.That'S how you get out of the mold.
It is recommended that more than 42.5 cement be selected, sand fine sand or quartz sand, and the ratio of cement to sand is between 1: 1-1: 3.The ratio of cement to water is between 1: 0.4-1: 0.7. sand is non-absorbent, and cement mixed with sand calculates only the amount of cement used.If not gaza, the drying process shrinks too much and is prone to cracking.
52.5 cement 8-12 hours demodel, cement 20-24 hours demodel, cement 32.5 more than 24 hours demodel, double the demodel time in cloudy and humid environments.The thicker the mold, the longer it takes to die out


*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·**·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·


Opening of the new shop, with a focus on civility:

Now, the next collection is concerned with this shop,

Get rel