Khuôn Làm Xà Phòng Handmade Hình Chữ Nhật Chất Liệu Silicone 102g
154.100
₫ 123.400
Sản phẩm Khuôn Làm Xà Phòng Handmade Hình Chữ Nhật Chất Liệu Silicone 102g đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 154.100 xuống còn ₫ 123.400, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Mold weight (g): about 217
Soap weight (g): about 108
Mold specification (cm): approximately 8x9.3x4.1
Specification completed (cm): approximately 6x7.2x3
Steps for the production of aroma gypsum:
1: prepare 100g gypsum powder, 35g water (30-35 g water)
-pour water into gypsum and stir it quickly and evenly.
-stir the plaster into the mold.
-shake the mold up and down, drain bubbles, and scrape off the surface with a scraping board.
-can be demodeled in about 30-60 minutes.
-can be polished, oil drip, color, and decorated after demodeling.
Aroma candle making method
-first, place raw materials (i.e. crayons, wax beeswax, etc.) in insulated containers and heat them in water.Don't let water contact raw materials, and when made with pure white paraffin and hope the final candle color, then put the crayon crumbs into the dye.
-pour the gradually melted wax into the model and place it together in the lamp-core. this time, you can drip the essential oil and mix it evenly.
-if you want a candle with a gradient color like a cocktail, just wait until the candle has solidified and poured into a new layer.
-when the material is completely cooled and solidified, it will be a great deal of effort to pull the core into the right length.
(wax selection techniques: aromatherapy candles, wax sheet materials temperature below 15 degrees celsius, recommended for use with ice wax or beeswax to prevent cracking.)
Soap molding steps:
-pour in a small amount of soap, such as a mold, to cover the surface of the pattern.
-hold soap mold with your hand, gently push the finger from the bottom to the top, and hold the pattern open to facilitate the flow of soap.
-gently up and down vibration soap mold 5-10 times to help bubbles drain upward.
-the remaining soap liquid will fill the soap mold.
*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·**·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·
Opening of the new shop, with a focus on civility:
Now, the next collection is concerned with this shop,
I.e. access to r
Soap weight (g): about 108
Mold specification (cm): approximately 8x9.3x4.1
Specification completed (cm): approximately 6x7.2x3
Steps for the production of aroma gypsum:
1: prepare 100g gypsum powder, 35g water (30-35 g water)
-pour water into gypsum and stir it quickly and evenly.
-stir the plaster into the mold.
-shake the mold up and down, drain bubbles, and scrape off the surface with a scraping board.
-can be demodeled in about 30-60 minutes.
-can be polished, oil drip, color, and decorated after demodeling.
Aroma candle making method
-first, place raw materials (i.e. crayons, wax beeswax, etc.) in insulated containers and heat them in water.Don't let water contact raw materials, and when made with pure white paraffin and hope the final candle color, then put the crayon crumbs into the dye.
-pour the gradually melted wax into the model and place it together in the lamp-core. this time, you can drip the essential oil and mix it evenly.
-if you want a candle with a gradient color like a cocktail, just wait until the candle has solidified and poured into a new layer.
-when the material is completely cooled and solidified, it will be a great deal of effort to pull the core into the right length.
(wax selection techniques: aromatherapy candles, wax sheet materials temperature below 15 degrees celsius, recommended for use with ice wax or beeswax to prevent cracking.)
Soap molding steps:
-pour in a small amount of soap, such as a mold, to cover the surface of the pattern.
-hold soap mold with your hand, gently push the finger from the bottom to the top, and hold the pattern open to facilitate the flow of soap.
-gently up and down vibration soap mold 5-10 times to help bubbles drain upward.
-the remaining soap liquid will fill the soap mold.
*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·**·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·
Opening of the new shop, with a focus on civility:
Now, the next collection is concerned with this shop,
I.e. access to r
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000