Khuôn Làm Bánh Chất Liệu Silicone Hình Chú Tiểu Và Tượng Phật

Mold size: as shown in figure


Aroma candle making method
(if you feel fragile when making a candle, cut it open because it is sealed well. when pouring the mold, wrap it around the rubber band. open it when demodeling.)
-first, place raw materials (i.e. soybean wax, ice wax wax beeswax, etc.) in insulated containers and heat them in water-isolation.Don't let water contact raw materials, and when made with pure white paraffin and hope the final candle color, then put the crayon crumbs into the dye.
-pour the gradually melted wax into the model and place it together in the lamp-core. this time, you can drip the essential oil and mix it evenly.
-if you want a candle with a gradient color like a cocktail, just wait until the candle has solidified and poured into a new layer.
-when the material is completely cooled and solidified, it will be a great deal of effort to pull the core into the right length.
(wax selection techniques: aromatherapy candles, wax sheet materials temperature below 15 degrees celsius, recommended for use with ice wax or beeswax to prevent cracking.)


Steps for the production of aroma gypsum:
1: prepare 100g gypsum powder, 35g water (30-35 g water)
-pour water into gypsum and stir it quickly and evenly.
-stir the plaster into the mold.
-shake the mold up and down, drain bubbles, and scrape off the surface with a scraping board.
-can be demodeled in about 30-60 minutes.
-can be polished, oil drip, color, and decorated after demodeling.
Ps: gypsum powder recommended imported white porcelain powder, fine powder, zero formaldehyde.
Pigments are recommended to use iron oxide powder or imported acrylic pigments, which are high saturation and do not fade without fear of water or matte.
Essential oils are recommended to use aromatic therapy grade essential oils, high concentration, no alcohol added, dilution water.


Soap molding steps:
-pour in a small amount of soap, such as a mold, to cover the surface of the pattern.
-hold soap mold with your hand, gently push the finger from the bottom to the top, and hold the pattern open to facilitate the flow of soap.
-gently up and down vibration soap mold 5-10 times to help bubbles drain upward.
-the remaining soap liquid will fill the soap mold.


*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·**·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·*·


Collection of attention to civil activities:

Now, the next collection is concerned with this shop,

I.e. access to r