Khối Đồng Cảm Biến Nhiệt Mk2.5 / Mk3 To Mk2.5S / Mk3S 3d Irv6 Cho E3D
385.000
₫ 231.000
Sản phẩm Khối Đồng Cảm Biến Nhiệt Mk2.5 / Mk3 To Mk2.5S / Mk3S 3d Irv6 Cho E3D đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 385.000 xuống còn ₫ 231.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
set2: 1 x copper heating block + 1 x Sensor ule
1.Place the IR-sensor on the top of the Extruder-body and secure it with the M2x8.
2.Tighten the M2x8 screw, the sensor shouldn't be able to move, but be careful the PCB isn't indestructible ;)
3.Connect the cable, mind the correct orientation of the connector and wires.
4.Leave a slack behind the sensor like in the picture. Don't create too big loop as it might interfere with the frame. If needed adjust the length by gently pulling/pushing the cable.
Item Type: Heated Block
el Number: copper heater block
The new sensor is using the optical sensor which is triggered
by a simple mechanical lever.
This sensor doesn't care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear.
How to match:
1 A2 Hardened Steel V6 Nozzles,click here
2 high quality V6 titanium alloy heat break TC4,click here
3 Thermistor Cartridge 350 degrees,click here
4 Thermistor Cartridge pt1000,click here
colour:copper/Black
Material:copper/metal + plastic
copper heating block size:22MM x 16MM x 11.5mm
Package Contents:
1 x copper heating block
1 x Sensor uleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
1.Place the IR-sensor on the top of the Extruder-body and secure it with the M2x8.
2.Tighten the M2x8 screw, the sensor shouldn't be able to move, but be careful the PCB isn't indestructible ;)
3.Connect the cable, mind the correct orientation of the connector and wires.
4.Leave a slack behind the sensor like in the picture. Don't create too big loop as it might interfere with the frame. If needed adjust the length by gently pulling/pushing the cable.
Item Type: Heated Block
el Number: copper heater block
The new sensor is using the optical sensor which is triggered
by a simple mechanical lever.
This sensor doesn't care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear.
How to match:
1 A2 Hardened Steel V6 Nozzles,click here
2 high quality V6 titanium alloy heat break TC4,click here
3 Thermistor Cartridge 350 degrees,click here
4 Thermistor Cartridge pt1000,click here
colour:copper/Black
Material:copper/metal + plastic
copper heating block size:22MM x 16MM x 11.5mm
Package Contents:
1 x copper heating block
1 x Sensor uleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000