Keo Dán Tản Nhiệt Cho Máy Tính
₫ 25.600
Sản phẩm Keo Dán Tản Nhiệt Cho Máy Tính đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description
Thermal glue is designed to keep heat sinks and electrical components togetherto get great cooling results. It starts as paste out of the tube andthen hardens in a few hours to hold the parts nice and tight. Thisstrong paste can be removed with a razor blade if you need to reseatitem.
Features
Prevent overheating & extend the life of your computer parts, LED flashlights and many other devices!
Heat paste and glue in same package
Does not dry in the tube
Lasts for many small projects
Very strong after it dries
Great heat transfer / thermal
Low electrical conductivity (highly insulating)
Example of use
3d printer hot ends typically use power resistors and thermistors to getthe hot end to the right temperature. This thermal glue is perfect tocreate the perfect connection between the resistors, thermistor andthermal glue to get an accurate temperature.
NOTE:Viscosity control better, with just a little more force to remove the heat sink (rotating around a few can be removed), removed after wipe clean with paper towels.
Package Includes:
1x Heatsink Pl
Thermal glue is designed to keep heat sinks and electrical components togetherto get great cooling results. It starts as paste out of the tube andthen hardens in a few hours to hold the parts nice and tight. Thisstrong paste can be removed with a razor blade if you need to reseatitem.
Features
Prevent overheating & extend the life of your computer parts, LED flashlights and many other devices!
Heat paste and glue in same package
Does not dry in the tube
Lasts for many small projects
Very strong after it dries
Great heat transfer / thermal
Low electrical conductivity (highly insulating)
Example of use
3d printer hot ends typically use power resistors and thermistors to getthe hot end to the right temperature. This thermal glue is perfect tocreate the perfect connection between the resistors, thermistor andthermal glue to get an accurate temperature.
NOTE:Viscosity control better, with just a little more force to remove the heat sink (rotating around a few can be removed), removed after wipe clean with paper towels.
Package Includes:
1x Heatsink Pl
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000