Keo Dán Nhựa Resin Epoxy Diy Đa Năng Fri B-7000
22.600
₫ 19.700
Sản phẩm Keo Dán Nhựa Resin Epoxy Diy Đa Năng Fri B-7000 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 22.600 xuống còn ₫ 19.700, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Dear, welcome to Fricese, I wish you a pleasant shopping experience here, the following is our , welcome to buy, please go down to see ~
3ml/9ml/25ml/50ml/115ml B-7000 Multi Purpose Glue Adhesive Epoxy Resin DIY Crafts Glass Touch Screen Cell Phone Super Glue
Features:
B7000 is a self-leveling adhesive that matches toys, flowers, jewelry,special environmental adhesive arts and crafts and other industries.
As compared to other adhesive, B-7000 has pungent odor but also has tiny scent; belonging to the new one-component adhesive transparent solution.
Normal temperature curing, easy to operate without re-packing, two kinds of openings can be used simultaneously.
With high elasticity, soft film, anti-vibration and waterproof.
For metal, glass, ceramics, stone, bamboo wood, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber , fiber, paper, rhinestones, and other materials,B7000 adhesive have a very good pasting properties.
Specifications:
Net content: 3ml/9ml/25ml/50ml/110ml
Product Material: Plastic/Resin
Appearance: Transparent semi-fluid
Solid content: 28%-35%
Hardness after curing: 70-85A
Surface drying time: 4 minutes
Complete healing time: 24-48 hours
Storage: Store at 10 degrees to 28 degrees
Usage:
-Please read the Introduction carefully before using the product.
-Before using in a large area, please do a small part of the experiment.
-Make sure that the sticky surface clean and dry.
-The best operating temperature should be between 18-32 degrees.
-The product can be used directly as required and evenly coated on the adhesive surface.
-Wait 3-6 minutes,two aligned adhesives stick together under a little pressure.
-After several hours of continuous placement, the best adhesive strength is after 48 hours.
-When the product is not the covered, avoid contact with air curing glue.
Reminder:
-May be irritating to the skin and eyes.
-Use in a well-ventilated environment.
-In case of contact with eyes, please rinse with plenty of water.
-Keep away from children's store, production operations, please stay away from fire.
-The shelf life is a year, the safe use of the product and end date can be seen at pipe end.
Same function can be sticky metal, leather, plastics, glass, resins, ceramics, each product has advantages.
Notes:
-Please allow 1-3 cm differs due to manual measurement.
-Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understan
3ml/9ml/25ml/50ml/115ml B-7000 Multi Purpose Glue Adhesive Epoxy Resin DIY Crafts Glass Touch Screen Cell Phone Super Glue
Features:
B7000 is a self-leveling adhesive that matches toys, flowers, jewelry,special environmental adhesive arts and crafts and other industries.
As compared to other adhesive, B-7000 has pungent odor but also has tiny scent; belonging to the new one-component adhesive transparent solution.
Normal temperature curing, easy to operate without re-packing, two kinds of openings can be used simultaneously.
With high elasticity, soft film, anti-vibration and waterproof.
For metal, glass, ceramics, stone, bamboo wood, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber , fiber, paper, rhinestones, and other materials,B7000 adhesive have a very good pasting properties.
Specifications:
Net content: 3ml/9ml/25ml/50ml/110ml
Product Material: Plastic/Resin
Appearance: Transparent semi-fluid
Solid content: 28%-35%
Hardness after curing: 70-85A
Surface drying time: 4 minutes
Complete healing time: 24-48 hours
Storage: Store at 10 degrees to 28 degrees
Usage:
-Please read the Introduction carefully before using the product.
-Before using in a large area, please do a small part of the experiment.
-Make sure that the sticky surface clean and dry.
-The best operating temperature should be between 18-32 degrees.
-The product can be used directly as required and evenly coated on the adhesive surface.
-Wait 3-6 minutes,two aligned adhesives stick together under a little pressure.
-After several hours of continuous placement, the best adhesive strength is after 48 hours.
-When the product is not the covered, avoid contact with air curing glue.
Reminder:
-May be irritating to the skin and eyes.
-Use in a well-ventilated environment.
-In case of contact with eyes, please rinse with plenty of water.
-Keep away from children's store, production operations, please stay away from fire.
-The shelf life is a year, the safe use of the product and end date can be seen at pipe end.
Same function can be sticky metal, leather, plastics, glass, resins, ceramics, each product has advantages.
Notes:
-Please allow 1-3 cm differs due to manual measurement.
-Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understan