Keo dán nhựa Resin đen siêu dính T7000 15ml T-7000 sửa chữa màn hình điện thoại
43.000
₫ 40.000
Sản phẩm Keo dán nhựa Resin đen siêu dính T7000 15ml T-7000 sửa chữa màn hình điện thoại đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 43.000 xuống còn ₫ 40.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
15ml T7000 Super Black Epoxy Resin T-7000 Black Body Rubber Super Sealant Mobile Phone Touch Screen Repair Glue
Product description:
-This glue is environmentally friendly, and does not
Hurt the material. It is especially convenient.
-Easy to install, anti-microbial, ultra-thin, scratch-resistant, high
Elasticity, soft film, anti-vibration and waterproof.
-T-7000 mobile phone beauty stick drill is a special adhesive for
Jewelry, craft gift and other industries.
Colloid is a product of mobile phone beauty industry. Compared
With other products, it does not need to re-package operation and
Reduce unnecessary trouble. And save more precious time.
-The irritating odor is small, belonging to a single-component new
, which is cured at room temperature and is easy to operate. It does not need to be repacked and can be used by opening the lid.
-T-7000 adhesive can be used to bond more materials to metal,
Glass, ceramic, stone, bamboo, cloth, leather, PE, PP, PVC, ABS,
Nylon, sponge, film, fabric, electronic components, plastics, rubber,
Fiber, paper, and other material.
It has good adhesion properties.
Product parameters:
Model: T7000
Shear strength: 1000 (MPa)
Size: 0.5 (mm)
Viscosity: 3500
Curing method: natural curing
Solid content: 30% -35%
Hardness after curing: 70-85A
Surface dry time: 3 minutes or so
Full cure time: 24-48 hours
Storage method: save at 10 to 28 degrees
Specifications: 15ML
Instructions:
-Please read the product description carefully before use.
-Please do a small area experiment before using it in large areas.
-Please ensure that the surface of the adherend is clean and dry.
-The operating temperature should be between 18-32 degrees.
-The product can be directly coated on the surface of the adherend
As needed.
-Wait for 1-2 minutes, align the two adherends with the adhesive and apply a little pressure.
-It can be put in a few hours, and the bonding strength is reached
After 48 hours.
-When the product is not in use, cover the bottle to avoid curing after the glue contacts the air.
Product List:
1* T-7000 Comes with a n
Product description:
-This glue is environmentally friendly, and does not
Hurt the material. It is especially convenient.
-Easy to install, anti-microbial, ultra-thin, scratch-resistant, high
Elasticity, soft film, anti-vibration and waterproof.
-T-7000 mobile phone beauty stick drill is a special adhesive for
Jewelry, craft gift and other industries.
Colloid is a product of mobile phone beauty industry. Compared
With other products, it does not need to re-package operation and
Reduce unnecessary trouble. And save more precious time.
-The irritating odor is small, belonging to a single-component new
, which is cured at room temperature and is easy to operate. It does not need to be repacked and can be used by opening the lid.
-T-7000 adhesive can be used to bond more materials to metal,
Glass, ceramic, stone, bamboo, cloth, leather, PE, PP, PVC, ABS,
Nylon, sponge, film, fabric, electronic components, plastics, rubber,
Fiber, paper, and other material.
It has good adhesion properties.
Product parameters:
Model: T7000
Shear strength: 1000 (MPa)
Size: 0.5 (mm)
Viscosity: 3500
Curing method: natural curing
Solid content: 30% -35%
Hardness after curing: 70-85A
Surface dry time: 3 minutes or so
Full cure time: 24-48 hours
Storage method: save at 10 to 28 degrees
Specifications: 15ML
Instructions:
-Please read the product description carefully before use.
-Please do a small area experiment before using it in large areas.
-Please ensure that the surface of the adherend is clean and dry.
-The operating temperature should be between 18-32 degrees.
-The product can be directly coated on the surface of the adherend
As needed.
-Wait for 1-2 minutes, align the two adherends with the adhesive and apply a little pressure.
-It can be put in a few hours, and the bonding strength is reached
After 48 hours.
-When the product is not in use, cover the bottle to avoid curing after the glue contacts the air.
Product List:
1* T-7000 Comes with a n
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000