Keo dán màn hình điện thoại LCD thủ công b7000 25ml
47.600
₫ 30.500
Sản phẩm Keo dán màn hình điện thoại LCD thủ công b7000 25ml đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 47.600 xuống còn ₫ 30.500, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description
B7000 intensity products, general product's versatility,is a self-leveling adhesive meets toys, flowers, jewelry. Special environmental bonding glue handicrafts and other industries, as compared to other adhesive B-7000 pungent odor but also tiny scent; belonging to the new one-component adhesive transparent solution, room temperature curing, easy to operate without re-packing, both openings may be used. With high elasticity, soft film, anti-vibration and waterproof. B7000 adhesive more material can be pasted, it metal, glass, ceramics, stone, bamboo wood, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber , fiber, paper type,Glass,Rhinestones, and other materials have a very good pasting properties.
Features:
Colorless, tasteless, non-bleaching, gently rubbing alcohol, it can perfectly remove excess glue. Bad first installed, you can drop points alcohol can also be easily removed again came in.
Special note attached LCD screen and the phone box and frame bracket: Before use, please do get small portions under test, in order to correct a positive grip method has been used in an amount, by hair dryer or heat gun is heated, it will accelerate the curing effect.
Technical data
Solid content: 33% -35%
After curing Hardness: 65-80A
Surface drying time: 3minutes
Full cure time: 24-48 hours
Storage: stored at 10 degrees to 28 degrees
Net content: 25ml
Instructions
-Before using the product, please read the instructions carefully introduced(Behind the Product).
-In front of a large area, a small area first to make experiments.
-Make sure that the sticky surface cleaning and drying.
-The best temperature should be between 18-32 degrees.
-The product can be directly lid on demand evenly coated on the surface of the adherend.
-Wait 3-6 minutes, the two adherends aligned adhesive little pressure.
-You can put straight hours, 48 hours after the optimum adhesive strength.
-When the product is not glue the caps avoid contact with air curing.
Package Include
1x 25ml B7000 Adh
B7000 intensity products, general product's versatility,is a self-leveling adhesive meets toys, flowers, jewelry. Special environmental bonding glue handicrafts and other industries, as compared to other adhesive B-7000 pungent odor but also tiny scent; belonging to the new one-component adhesive transparent solution, room temperature curing, easy to operate without re-packing, both openings may be used. With high elasticity, soft film, anti-vibration and waterproof. B7000 adhesive more material can be pasted, it metal, glass, ceramics, stone, bamboo wood, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber , fiber, paper type,Glass,Rhinestones, and other materials have a very good pasting properties.
Features:
Colorless, tasteless, non-bleaching, gently rubbing alcohol, it can perfectly remove excess glue. Bad first installed, you can drop points alcohol can also be easily removed again came in.
Special note attached LCD screen and the phone box and frame bracket: Before use, please do get small portions under test, in order to correct a positive grip method has been used in an amount, by hair dryer or heat gun is heated, it will accelerate the curing effect.
Technical data
Solid content: 33% -35%
After curing Hardness: 65-80A
Surface drying time: 3minutes
Full cure time: 24-48 hours
Storage: stored at 10 degrees to 28 degrees
Net content: 25ml
Instructions
-Before using the product, please read the instructions carefully introduced(Behind the Product).
-In front of a large area, a small area first to make experiments.
-Make sure that the sticky surface cleaning and drying.
-The best temperature should be between 18-32 degrees.
-The product can be directly lid on demand evenly coated on the surface of the adherend.
-Wait 3-6 minutes, the two adherends aligned adhesive little pressure.
-You can put straight hours, 48 hours after the optimum adhesive strength.
-When the product is not glue the caps avoid contact with air curing.
Package Include
1x 25ml B7000 Adh
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000