Keo nhựa resin epoxy dán màn hình cảm ứng b-7000 b7000 3ml diy đa năng tiện dụng
22.000
₫ 19.000
Sản phẩm Keo nhựa resin epoxy dán màn hình cảm ứng b-7000 b7000 3ml diy đa năng tiện dụng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 22.000 xuống còn ₫ 19.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
B7000 is a self-leveling adhesive meets toys, flowers, jewelry. Special environmental bonding glue handicrafts and other industries, as compared to other adhesive B-7000 pungent odor but also tiny scent; belonging to the new one-component adhesive transparent solution, room temperature curing, easy to operate without re-packing, both openings may be used. With high elasticity, soft film, anti-vibration and waterproof. B7000 adhesive more material can be pasted, it metal, glass, ceramics, stone, bamboo wood, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber , fiber, paper type,Glass,Rhinestones, and other materials have a very good pasting properties.
Technical data
Appearance: transparent semi-fluid
Solid content: 28% -35%
After curing Hardness: 70-85A
Surface dry time: 4 minutes
Full cure time: 24-48 hours
Storage: stored at 10 degrees to 28 degrees
Net content: 3ml
Usage
-Please read carefully before using the product description Introduction
-in front of a large area of use, please do a small area of the experiment
-Make sure that the sticky surface clean and dry
-the optimum operating temperature should be between 18-32 degrees
-the product can be used directly as needed openings evenly coated in sticky surface
-wait 3-6 minutes, the two are aligned adhesive sticky little pressure
-put a few hours straight, 48 hours after the optimum adhesive strength
-when the product is not the cap after Shang Hao avoid contact with air cured glue
Note
-may be irritating to the skin and eyes
-Use in a well-ventilated environment
-In case of contact with eyes, rinse with plenty of water
-Keep away from children's store, production operations, please stay away from fire
-the shelf life of a year, the safe use of the product pipe end dat
Technical data
Appearance: transparent semi-fluid
Solid content: 28% -35%
After curing Hardness: 70-85A
Surface dry time: 4 minutes
Full cure time: 24-48 hours
Storage: stored at 10 degrees to 28 degrees
Net content: 3ml
Usage
-Please read carefully before using the product description Introduction
-in front of a large area of use, please do a small area of the experiment
-Make sure that the sticky surface clean and dry
-the optimum operating temperature should be between 18-32 degrees
-the product can be used directly as needed openings evenly coated in sticky surface
-wait 3-6 minutes, the two are aligned adhesive sticky little pressure
-put a few hours straight, 48 hours after the optimum adhesive strength
-when the product is not the cap after Shang Hao avoid contact with air cured glue
Note
-may be irritating to the skin and eyes
-Use in a well-ventilated environment
-In case of contact with eyes, rinse with plenty of water
-Keep away from children's store, production operations, please stay away from fire
-the shelf life of a year, the safe use of the product pipe end dat
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000