Tai Nghe Bluetooth I12 Không Dây Kiểu Dáng Dễ Thương Cho Điện Thoại Có Mic Tương Thích Android / IOS
89.000
₫ 75.000
Sản phẩm Tai Nghe Bluetooth I12 Không Dây Kiểu Dáng Dễ Thương Cho Điện Thoại Có Mic Tương Thích Android / IOS đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 89.000 xuống còn ₫ 75.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,1 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
How to wear it: In ear
Waterproof level: IPX1
Category of headphones: True wireless headset
Noise reduction function: Active noise reduction
Endurance time: 2Hours (inclusive) 4Hours (excluding)
transmission distance: 3m (inclusive) -5m (excluding)
Bluetooth function: Bluetooth5.0
Charge is required to activate the battery before first use This machine is compatible with most of the charging cables on the market, if it cannot charge, please replace the charging cable and try again.
The method of matching two channels is as follows
1. Turn off the Bluetooth function of the phone
2. Put both headphones on while touching the sensor area for 5 seconds until the power is turned off (the power prompt appears)
3. Simultaneously touch the sensor area for 5 seconds to turn on (the power prompt appears)
4. Wait for the headphones to be paired (pairing sound appears)
5. Both sides of the headset prompt Left Channel, Right Channel indicates that pairing is completed and dual channel mode has been successfully entered
(The pairing time is affected by the environment. If the pairing fails for a long time, please repeat the above steps.)
This store is a cross-border shop, has delays, and cannot provide 24-hour personal service. Please unders
Waterproof level: IPX1
Category of headphones: True wireless headset
Noise reduction function: Active noise reduction
Endurance time: 2Hours (inclusive) 4Hours (excluding)
transmission distance: 3m (inclusive) -5m (excluding)
Bluetooth function: Bluetooth5.0
Charge is required to activate the battery before first use This machine is compatible with most of the charging cables on the market, if it cannot charge, please replace the charging cable and try again.
The method of matching two channels is as follows
1. Turn off the Bluetooth function of the phone
2. Put both headphones on while touching the sensor area for 5 seconds until the power is turned off (the power prompt appears)
3. Simultaneously touch the sensor area for 5 seconds to turn on (the power prompt appears)
4. Wait for the headphones to be paired (pairing sound appears)
5. Both sides of the headset prompt Left Channel, Right Channel indicates that pairing is completed and dual channel mode has been successfully entered
(The pairing time is affected by the environment. If the pairing fails for a long time, please repeat the above steps.)
This store is a cross-border shop, has delays, and cannot provide 24-hour personal service. Please unders