Hệ Thống Tưới Nước Nhỏ Giọt

Automatic Watering Garden Hose Micro Drip Irrigation System Garden Drip Kit with Adjustable Nozzle
Descriptions:
Fine atomizing nozzle is made of brass main body, with stainless steel core guide blade, liquid forming a centrifugal vortex in the guide blade, and spraying fine hollow fog particles from the nozzle hole. It can be widely used in factory building humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog. This kind of nozzle hole is made by using American precision drilling machine with hole diameter of 0.3mm. Excellent, use cost compared with air humidification, save more than 10 times.
This series of nozzles do not need air assistance, the system is simple, the spray point is fine, the atomization is sufficient, saving, water saving, low cost, good effect; stainless steel spray sheet is treated by advanced forging process, durable. The life of the nozzle is 2.5 times longer than that of the nozzle of the same kind.
This nozzle can fully utilize the pressure of tap water for atomization, and the use of high-pressure water pump is better.
Scope of application:
Agriculture, lawn, villas, industrial irrigation, green belt irrigation, dehumidification is the preferred products. Easy installation, good water-saving performance!

Installation steps:
1. It is suggested that the atomization system should be installed at a height of 2.5m-3m.
2. Connect the adapter to the tap.
3. Open the faucet cleaning system for 1 minute to clean the system and remove impurities.
4. Screw the spray nozzles onto the three way fittings, except for one nozzle at the end.
5. Turn on the faucet cleaning system for 2 minutes to ensure that the system is completely cleaned.
6. Close the water and install the last nozzle on the joint and use the end plug.
7. The atomization pipeline is fixed by the cable provided with saddle clamp.
8. Turn on the faucet until the sprayer works and enjoy the cooling atomization system.
9. When the atomization system is not used for a long time, close the nozzle and keep it dry and clean.

Specifications:
Length: 5m/16.4ft,15m/49.2ft,25m/82ft
Material: Plastics
Packing method: OPP bag packing
Specification:
5 meter suit
5 m X 4/7 hose
1 X Universal tap joint
1 X Capillary Fast Connector
15 X Adjustable single outlet atomizing nozzle

15 meter suit
15 m X 4/7 hose
1 X Universal tap joint
1 X Capillary Fast Connector
20 X Adjustable single outlet atomizing nozzle

25 meter suit
25 m X 4/7 hose
1 X Universal tap joint
1 X Capillary Fast Connector
30 X Adjustable single outlet atomizing nozzle

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measure