Hệ Thống Quạt Làm Mát Phun Sương 19.6ft
630.100
₫ 347.300
Sản phẩm Hệ Thống Quạt Làm Mát Phun Sương 19.6ft đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 630.100 xuống còn ₫ 347.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specification:
Brand new
Hood Material: Polyethylene, Plastic, Brass, Stainless Steel
Color: Black
Size: Approx. 6m
Great for cooling your outdoor living areas
Installs in less than 10 minutes
Cools the surrounding air temperatures up to 20 degrees
How to Install:
(It is recommended to installed the misting system at a height of 2.5 m-3 m)
Steps 1: Connect the adapter to the water tap
Steps 2: Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities
Steps 3: Screw the misting nozzles to the Tee fittings, except the last one on the end plug
Steps 4: Turn on the water tap to wash the system for 2 minutes to insure that the system is fully purged
Steps 5: Turn the water off and install the last nozzle into the fitting with the end plug
Steps 6: Fix the misting line by the cable ties saddle clamps provided
Steps 7: Turn on the tap slightly until jets are working, enjoy the cooling misting system
Steps 8: Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time
Package Included:
1PC x 6M Fabricated Misting Line
7Pcs x Brass with Stainless Nozzles
7Pcs x Saddle Clamps
1 Set x Cable Ties
Note:
Please allow minor deviation due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the
Brand new
Hood Material: Polyethylene, Plastic, Brass, Stainless Steel
Color: Black
Size: Approx. 6m
Great for cooling your outdoor living areas
Installs in less than 10 minutes
Cools the surrounding air temperatures up to 20 degrees
How to Install:
(It is recommended to installed the misting system at a height of 2.5 m-3 m)
Steps 1: Connect the adapter to the water tap
Steps 2: Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities
Steps 3: Screw the misting nozzles to the Tee fittings, except the last one on the end plug
Steps 4: Turn on the water tap to wash the system for 2 minutes to insure that the system is fully purged
Steps 5: Turn the water off and install the last nozzle into the fitting with the end plug
Steps 6: Fix the misting line by the cable ties saddle clamps provided
Steps 7: Turn on the tap slightly until jets are working, enjoy the cooling misting system
Steps 8: Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time
Package Included:
1PC x 6M Fabricated Misting Line
7Pcs x Brass with Stainless Nozzles
7Pcs x Saddle Clamps
1 Set x Cable Ties
Note:
Please allow minor deviation due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000