Hệ Thống Phun Sương Làm Mát Kèm Van Kiểm Tra 20cm

Product Name: Mist Coolant Lubrication Spray System
Material: Metal
Type: Coupling
Cooling Pipe Length: 200 mm
Check Valve: Yes
Filter: Yes
Oil Outlet Port Size: 4 mm
PU Tube Length: 1.5 m
Air Inlet Port Size: 8 mm

Features:

- Save 60-80% lubricants compared with the oldest lubrication tube.
- It is helpful to ensure the processing quality and the best use effect of cutting tools.
- It can increase processing speed, save processing time and cost, and reduce tool wear.
- Increasing the sealing method can avoid internal leakage and prolong the service life.
- Processing alloys or super hard materials can also achieve a smooth and high-precision surface.
- Brass Flexible Pipe is more resistant to high temperatures.- Cooling, lubricating and blowing out the iron layer can be completed at one time during the processing.
Model: SKA-RC-20-8-4-1.5
Material: Metal + Brass
Air Pressure: 5-7kgt/cm² (the atomization effect is related to gas volume and oxygen pressure)
Applicable Liquid Viscosity: 0-68cSt
Copper Nozzle Inner Diameter: 2.12mm
Internal Spray Nozzle Inner Diameter: 1mm
Installation Method: Internal Thread Connection
Application: Lathe, drilling machine, milling machine, grinder, tapping machine, tool grinder, CNC machine tool, weighing machine, sawing machine, woodworking machinery, feeding machine, etc.
Steps of Operation:
- Insert the liquid tube.
- Insert the air tube.
- Put the filter into liquid.
- Open the air source by using two valve to adjust inlet air/liquid flow rate to get suitable outlet mist and impulsive force.
Place of Application: Metal Cutting Engraving Cooling Machine
Note:
- Clean liquid must be used.
- Do not use corrosive liquids.
Product Weight: 210 G / 7.41 Ounces
Product Dimensions (L*W*H): 290*50*30 MM / 11.42*1.97*1.18 Inches
Package Weight: 210.0 G / 7.41 Ounces
Package Dimensions (L*W*H): 290*50*30 MM / 11.42*1.97*1.18 Inches
Retail Packaging: Yes, General Box

Package Including:
1 x Mist Coolant Lubrication Spray S