Giá Đỡ Thanh Tạ Ls1 Ls2 Ls3 4.8 5.3 6.0 Lq9 Ls4 Cho Lsentymille

Characteristics: 1.The oe plastic barbells were about 0.020 inches loose at the time of departure, so particles up to 500 microns leak through the barbells.2.When the oil spill passes through the barbell, it enters the camshaft bearing, lifter, crank and rod bearing directly without filtering.3.According to the filter brand, the filter will filter out about 25 microns.Our billet barbells are suitable for about 0.001 inches of gap and can pass only about 20-25 microns, the same as filters.4.Another important part is the barbell bar.Oil must flow around it to reach the oil port.This billet barbell is 30% smaller and has much less flow limit.5.In addition, there is a 1/4-20 threaded hole at the end of our barbell for easy disassembly.Just screw in 1/4-20 screws and pull the barbell out.Professional installlation (excluding instructions) is strongly recommended.Description: better engine protection, can prevent less and less particle bypass, smaller limiting shafts to achieve better oil flow, replaceable high temperature fluoro rubber o-rings, and easy-to-repair 1/4-20 threaded holes.Specification: material: cnc billet,7075 billet aluminum thread hole: 1/4-20 application: for ls1 ls2 ls3 4.8 5.3 6.0 lq9 ls4 packaging including: 1 x aluminum separator barbell note: 1.Allow 0-1 inch error to be measured manually.Thank you for your understanding.2.The display is not aligned and the color of the project shown in the photo may be slightly different from the actual object.Smaller limiting shafts for better oil flow, replaceable high temperature fluoro rubber o-rings, and easy-to-repair 1/4-20 threaded holes.Specification: material: cnc billet,7075 billet aluminum thread hole: 1/4-20 application: for ls1 ls2 ls3 4.8 5.3 6.0 lq9 ls4 packaging including: 1 x aluminum separator barbell note: 1.Allow 0-1 inch error to be measured manually.Thank you for your understanding.2.The display is not aligned and the color of the project shown in the photo may be slightly different from the actual object.Smaller limiting shafts for better oil flow, replaceable high temperature fluoro rubber o-rings, and easy-to-repair 1/4-20 threaded holes.Specification: material: cnc billet,7075 billet aluminum thread hole: 1/4-20 application: for ls1 ls2 ls3 4.8 5.3 6.0 lq9 ls4 packaging including: 1 x aluminum separator barbell note: 1.Allow 0-1 inch error to be measured manually.Thank you for your understanding.2.The display is not aligned and the color of the project shown in the photo may be slightly different from the actual object.1 x aluminum oil splitter barbell note: 1.Allow 0-1 inch error due to manual measurements.Thank you for your understanding.2.The display is not aligned and the color of the project shown in the photo may be slightly different from the actual object.1 x aluminum oil splitter barbell note: 1.Allow 0-1 inch error due to manual measurements.Thank you for your understanding.2.The display is not aligned and the color of the project shown in the photo may