Giá Đỡ Điện Thoại Kiêm Sạc Không Dây Mr- Cs-1288A1 Bằng Hợp Kim Nhôm Chống Thấm Nước Cho Xe Đạp / Xe Máy
787.000
₫ 472.200
Sản phẩm Giá Đỡ Điện Thoại Kiêm Sạc Không Dây Mr- Cs-1288A1 Bằng Hợp Kim Nhôm Chống Thấm Nước Cho Xe Đạp / Xe Máy đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 787.000 xuống còn ₫ 472.200, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
With independent waterproof switch, this phone bracket can control wired and wireless charging separately and freely switch the charging mode.
This mobile phone holder has retractable design, which is easy and convenient for you to store and carry.
Made of aluminum alloy, stainless steel and ABS material, it is sturdy, wear-resistant and durable.
The length of this product is 19cm, the width is 15cm, and the height is 8.5cm. This product is equipped with a 135cm power cord, which can be installed on any power cable of the car to fully meet any installation requirements.
It is suitable for bicycles, motorcycles, electric bikes, bikes, scooters, etc. And this mobile phone holder supports wired and wireless charging to meet more customer needs. Besides, it has two fixing methods, namely handlebars and rearview mirrors.
Item Name: Phone Holder
Material: Stainless Steel,Aluminum Alloy,ABS
Input Voltage: 12-24V
Output Power: Wireless Charging 10W USB Port QC3.0 (5V 3A / 9V 2A / 12V 1.5A)
Waterproof Grade: IP65
Stand-by Current: 2 mAh
Working Frequency: 125 KHZ
Suitable Mobile Phone Size: 4.7-6.5 Inches (Thickness Below 12mm)
Cable Length: 135cm
Head Diameter: 24mm
Wireless Charging Distance: ≦8MM
Overheat Protection Temperature: 60 Degrees Celsius
Applicable Diameter of Lens Holder: 0.9-1.1cm
Handlebar Applicable Diameter: 1.2-3.2cm
Size Details:
19cm x 15cm x 8.5cm/7.48" x 5.91" x 3.35" (Approx.)
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Light description: switch on the first gear, the mobile phone will charge wirelessly, and the red indicator light is on to indicate standby charging, the blue indicator light in breathing mode indicates wireless charging; turn on the second gear USB output to charge, the blue indicator light is always on; turn on the middle gear, then the charging will turn off.
Package Includes:
1 x Ball Head Connecting Rod
1 x Lens Holder Fixing Bracket
2 x U-shaped Faucet Fittings
1 x T-shaped Bracket
2 x Nuts
1 x Non-slip Gasket
2 x Screw Caps
2 x Screw Washers
1 x
With independent waterproof switch, this phone bracket can control wired and wireless charging separately and freely switch the charging mode.
This mobile phone holder has retractable design, which is easy and convenient for you to store and carry.
Made of aluminum alloy, stainless steel and ABS material, it is sturdy, wear-resistant and durable.
The length of this product is 19cm, the width is 15cm, and the height is 8.5cm. This product is equipped with a 135cm power cord, which can be installed on any power cable of the car to fully meet any installation requirements.
It is suitable for bicycles, motorcycles, electric bikes, bikes, scooters, etc. And this mobile phone holder supports wired and wireless charging to meet more customer needs. Besides, it has two fixing methods, namely handlebars and rearview mirrors.
Item Name: Phone Holder
Material: Stainless Steel,Aluminum Alloy,ABS
Input Voltage: 12-24V
Output Power: Wireless Charging 10W USB Port QC3.0 (5V 3A / 9V 2A / 12V 1.5A)
Waterproof Grade: IP65
Stand-by Current: 2 mAh
Working Frequency: 125 KHZ
Suitable Mobile Phone Size: 4.7-6.5 Inches (Thickness Below 12mm)
Cable Length: 135cm
Head Diameter: 24mm
Wireless Charging Distance: ≦8MM
Overheat Protection Temperature: 60 Degrees Celsius
Applicable Diameter of Lens Holder: 0.9-1.1cm
Handlebar Applicable Diameter: 1.2-3.2cm
Size Details:
19cm x 15cm x 8.5cm/7.48" x 5.91" x 3.35" (Approx.)
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Light description: switch on the first gear, the mobile phone will charge wirelessly, and the red indicator light is on to indicate standby charging, the blue indicator light in breathing mode indicates wireless charging; turn on the second gear USB output to charge, the blue indicator light is always on; turn on the middle gear, then the charging will turn off.
Package Includes:
1 x Ball Head Connecting Rod
1 x Lens Holder Fixing Bracket
2 x U-shaped Faucet Fittings
1 x T-shaped Bracket
2 x Nuts
1 x Non-slip Gasket
2 x Screw Caps
2 x Screw Washers
1 x
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000