Ethernet W5100 R3 Network Expansion Board Supports MEGA Module UNO
293.865
₫ 255.663
Sản phẩm Ethernet W5100 R3 Network Expansion Board Supports MEGA Module UNO đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 293.865 xuống còn ₫ 255.663, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
The Ethernet expansion board allows the controller to connect to the network. It is an expansion board with built-in WizNet W5100 TCP/IP microprocessor. This board is connected to the board through a wire-wrap header. Using the Ethernet library program in the IDE, you can easily use this expansion board to connect to the network. This expansion board supports the connection of 4 sockets at the same time.
And the R3 version of this expansion board also added a 1.0 standard output port consisting of 4 additional ports: 2 on the ARFF side and 2 on the RESET side. The two ports on the side of RESET, one is IOREF, is used to adapt the expansion board to the motherboard. Another empty port is reserved for future expansion.
This version adds a micro-SD card slot and has a network storage function. In addition, it is fully compatible with Duemilanove and Mega series. It also has an independent PoE (power-over-Ethernet) module. The module can be soldered to the motherboard to transmit power through twisted pair. This is in compliance with the IEEE802.3af standard and is compatible with existing PoE modules.
Technical specifications
Compatible with Mega2560/Uno rev3 standard output port
Micro-SD card connector PoE reset controller with active voltage converter function
Compatible with MEGA board
Note:
Due to manual measurement, please allow 1-3mm different.
Due to different displays and different lighting, the image may not reflect the actual colors of the project.
Thank you for your understanding.
When purchasing electronic components, please have certain electronic basic knowledge of the module. Most modules only provide descriptions or send materials. There is no technical consulting support. Please be careful to shoot for begin
And the R3 version of this expansion board also added a 1.0 standard output port consisting of 4 additional ports: 2 on the ARFF side and 2 on the RESET side. The two ports on the side of RESET, one is IOREF, is used to adapt the expansion board to the motherboard. Another empty port is reserved for future expansion.
This version adds a micro-SD card slot and has a network storage function. In addition, it is fully compatible with Duemilanove and Mega series. It also has an independent PoE (power-over-Ethernet) module. The module can be soldered to the motherboard to transmit power through twisted pair. This is in compliance with the IEEE802.3af standard and is compatible with existing PoE modules.
Technical specifications
Compatible with Mega2560/Uno rev3 standard output port
Micro-SD card connector PoE reset controller with active voltage converter function
Compatible with MEGA board
Note:
Due to manual measurement, please allow 1-3mm different.
Due to different displays and different lighting, the image may not reflect the actual colors of the project.
Thank you for your understanding.
When purchasing electronic components, please have certain electronic basic knowledge of the module. Most modules only provide descriptions or send materials. There is no technical consulting support. Please be careful to shoot for begin