DVD Bộ Chuyển Đổi Ổ Cứng Ide Sang Ata Sata 2.5 Hdd Mới
185.500
₫ 114.400
Sản phẩm DVD Bộ Chuyển Đổi Ổ Cứng Ide Sang Ata Sata 2.5 Hdd Mới đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 185.500 xuống còn ₫ 114.400, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
specification:
Material: electronic components
Color: picture color
Size: 69 * 14 * 11mm
Weight: 10g
Product list: 1* riser card
This card is a one-way conversion card IDE to SATA, which is used to transfer the notebook 2.5-inch IDE hard disk to the SATA interface. That is, the old 2.5-inch IDE hard drive is transferred to the SATA interface of the new motherboard. It can only be used with a 2.5-inch IDE hard drive, and other devices cannot be converted. Buyers should not make a mistake. .
2.5 IDE to SATA adapter card SATA to IDE laptop IDE to SATA interface JM20330
The card has no foolproof design; before the buyer uses it, the hard disk and the adapter card must be properly connected. The correct connection method is: after the hard disk is connected with the card, the width of the hard disk is flush with the width of the card, and the hard disk jumper is 4 positions for the
Material: electronic components
Color: picture color
Size: 69 * 14 * 11mm
Weight: 10g
Product list: 1* riser card
This card is a one-way conversion card IDE to SATA, which is used to transfer the notebook 2.5-inch IDE hard disk to the SATA interface. That is, the old 2.5-inch IDE hard drive is transferred to the SATA interface of the new motherboard. It can only be used with a 2.5-inch IDE hard drive, and other devices cannot be converted. Buyers should not make a mistake. .
2.5 IDE to SATA adapter card SATA to IDE laptop IDE to SATA interface JM20330
The card has no foolproof design; before the buyer uses it, the hard disk and the adapter card must be properly connected. The correct connection method is: after the hard disk is connected with the card, the width of the hard disk is flush with the width of the card, and the hard disk jumper is 4 positions for the