Dụng cụ tẩy vết trầy xước/đánh bóng vệ sinh bằng xeri oxit chuyên dụng kính chắn gió xe hơi 3''
533.300
₫ 312.200
Sản phẩm Dụng cụ tẩy vết trầy xước/đánh bóng vệ sinh bằng xeri oxit chuyên dụng kính chắn gió xe hơi 3'' đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 533.300 xuống còn ₫ 312.200, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specification:
Brand new
Material: plastic, metal, wool
Cerium Oxide Powder Capacity: 70g
Felt polishing wheel pad plate diameter: approx. 75mm
Felt polishing wheel diameter: approx. 20mm/30mm
Drill Adapter Diameter: approx. 6mm
Wool Polishing Pad Diameter: 3''
Pad Max RPM: 12000
Feature:
Cerium Oxide is the best polishing powder to glass scratch because the chemical and physical reaction.
It can save you great money to change a new glass.
Easy to use, just mix powder with water and apply to the glass surface with the polishing felt.
Can be used on windows, mirrors, tabletops, windshields, glass tables, shower screens, windscreens, fish tanks, car headlights etc.
Suggested Instructions for Use of Cerium Oxide:
(1) Supplies needed:
-Cerium oxide
-Water (some recommend distilled water)
-Polishing wheel
-Electric drill
-Small plastic tubs (Pint or quart size)
-Spray bottle
(2) Direction:
-Clean the area you're going to work on thoroughly. Be sure there is no dirt or grime on the glass, as this may result in additional scratches once you start buffing.
-Have two small plastic tubs ready; quart or pint sized containers work well. Fill one halfway with water.
-Place your polishing wheel into the water; let it become thoroughly damp, but not dripping wet.
-Put some of Cerium Oxide into the empty tub, and add enough water to create a slurry (a thin, paste-like mixture).
-Attach the dampened polishing wheel to your electric drill and dip it into the slurry.
-Place the polishing wheel on your work area, use small size felt wheel if scratch is near corner of windows; keep the wheel moving in an up and down and circular motion. Be sure that the slurry does not dry up, as this could cause your glass to overheat and crack. If your slurry is becoming dry, you can spritz it with a spray bottle full of water.
Package included:
1 x 70g Cerium Oxide Powder
1 x 2 cm Felt Polishing Wheel
1 x 3 cm Felt Polishing Wheel
1 x 3'' Felt Polishing Wheel Pad Plate
3 x 3" Diameter Wool Polishing Pad
1 x 6mm Drill Adapter
1 x Polishing Cloth
Note:
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated s
Brand new
Material: plastic, metal, wool
Cerium Oxide Powder Capacity: 70g
Felt polishing wheel pad plate diameter: approx. 75mm
Felt polishing wheel diameter: approx. 20mm/30mm
Drill Adapter Diameter: approx. 6mm
Wool Polishing Pad Diameter: 3''
Pad Max RPM: 12000
Feature:
Cerium Oxide is the best polishing powder to glass scratch because the chemical and physical reaction.
It can save you great money to change a new glass.
Easy to use, just mix powder with water and apply to the glass surface with the polishing felt.
Can be used on windows, mirrors, tabletops, windshields, glass tables, shower screens, windscreens, fish tanks, car headlights etc.
Suggested Instructions for Use of Cerium Oxide:
(1) Supplies needed:
-Cerium oxide
-Water (some recommend distilled water)
-Polishing wheel
-Electric drill
-Small plastic tubs (Pint or quart size)
-Spray bottle
(2) Direction:
-Clean the area you're going to work on thoroughly. Be sure there is no dirt or grime on the glass, as this may result in additional scratches once you start buffing.
-Have two small plastic tubs ready; quart or pint sized containers work well. Fill one halfway with water.
-Place your polishing wheel into the water; let it become thoroughly damp, but not dripping wet.
-Put some of Cerium Oxide into the empty tub, and add enough water to create a slurry (a thin, paste-like mixture).
-Attach the dampened polishing wheel to your electric drill and dip it into the slurry.
-Place the polishing wheel on your work area, use small size felt wheel if scratch is near corner of windows; keep the wheel moving in an up and down and circular motion. Be sure that the slurry does not dry up, as this could cause your glass to overheat and crack. If your slurry is becoming dry, you can spritz it with a spray bottle full of water.
Package included:
1 x 70g Cerium Oxide Powder
1 x 2 cm Felt Polishing Wheel
1 x 3 cm Felt Polishing Wheel
1 x 3'' Felt Polishing Wheel Pad Plate
3 x 3" Diameter Wool Polishing Pad
1 x 6mm Drill Adapter
1 x Polishing Cloth
Note:
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated s