Dụng cụ phun sơn cho máy bơm Graco Titan Wagner
919.900
₫ 498.300
Sản phẩm Dụng cụ phun sơn cho máy bơm Graco Titan Wagner đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 919.900 xuống còn ₫ 498.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specification:
Brand new
Maximum operating pressure: 3600psi
Feed inlet: 1/4 npsm
Trigger: 4 fingers
Size & color: as picture shows
Immersion liquid: stainless steel, polyurethane, polyethylene, nylon, Teflon
Ergonomically designed handle to reduce fatigue
Needle no need to adjust, maintenance more easily and quickly
It can handle with:
High solid content epoxy paint and primer
High solid content polyurethane topcoat and primer coatings
Architectural latex paint
Coal tar epoxy primer
Tanks and piping inner coating
Before use:
First of all, the paint was removed to check whether there is a rupture damage, found that should be replaced immediately.
That will have the air pressure of the trachea access to the end of the handle end of the air inlet connection, you must check into the air outlet and each part of the connection whether have a leak, there is leakage phenomenon should be even maintenance.
According to the requirements of the quality of the paint required to adjust the application of the paint sprayer
How to maintain:
Every time the use of tools from the tool air inlet filling 3 to 4 drops of special gas oil to reduce wear and prolong the service life of the tool.
To ensure that the supply of gas source tool dry, no impurities
Regular cleaning, gas maintenance, timely replacement of worn parts
Package included:
1 x airless paint sprayer
1 x 517 spray tip and tip guard
Note:
Please allow 1-5mm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated s
Brand new
Maximum operating pressure: 3600psi
Feed inlet: 1/4 npsm
Trigger: 4 fingers
Size & color: as picture shows
Immersion liquid: stainless steel, polyurethane, polyethylene, nylon, Teflon
Ergonomically designed handle to reduce fatigue
Needle no need to adjust, maintenance more easily and quickly
It can handle with:
High solid content epoxy paint and primer
High solid content polyurethane topcoat and primer coatings
Architectural latex paint
Coal tar epoxy primer
Tanks and piping inner coating
Before use:
First of all, the paint was removed to check whether there is a rupture damage, found that should be replaced immediately.
That will have the air pressure of the trachea access to the end of the handle end of the air inlet connection, you must check into the air outlet and each part of the connection whether have a leak, there is leakage phenomenon should be even maintenance.
According to the requirements of the quality of the paint required to adjust the application of the paint sprayer
How to maintain:
Every time the use of tools from the tool air inlet filling 3 to 4 drops of special gas oil to reduce wear and prolong the service life of the tool.
To ensure that the supply of gas source tool dry, no impurities
Regular cleaning, gas maintenance, timely replacement of worn parts
Package included:
1 x airless paint sprayer
1 x 517 spray tip and tip guard
Note:
Please allow 1-5mm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated s
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000