Dụng Cụ Giữ Mũi Khoan Nt30 Er20
538.000
₫ 361.900
Sản phẩm Dụng Cụ Giữ Mũi Khoan Nt30 Er20 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 538.000 xuống còn ₫ 361.900, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
1. Large clamping force and large clamping range.
2. Widely used in drilling, milling, drilling, tapping, carving, CNC and other processing
Instructions for use
Pull the pressure cap, gently turn the rod, place the eccentric part of the groove in the groove, and push the holder evenly in the direction of arrow A to wear the pressure cap.
Install the retainer and cover on the puller or machine tool spindle, clean the cylindrical handle of the tool and insert it into the clamping hole. Use a wrench to tighten the pressure cap evenly until you can use the tool holder.
When the tool is replaced, loosen the cap with a wrench to remove the chuck and tool, remove the tool, push the rod in the direction of the arrow, take it out, then you must put the other holes into a cane.
Name: NT30-ER20 milling shank
Color: sier
Material: Steel
Package Contents:
1 x CNC Milling Toolholder
Note: And avoid installing tools on the adjustment pressure cap, so as not to damage the tie rodOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
2. Widely used in drilling, milling, drilling, tapping, carving, CNC and other processing
Instructions for use
Pull the pressure cap, gently turn the rod, place the eccentric part of the groove in the groove, and push the holder evenly in the direction of arrow A to wear the pressure cap.
Install the retainer and cover on the puller or machine tool spindle, clean the cylindrical handle of the tool and insert it into the clamping hole. Use a wrench to tighten the pressure cap evenly until you can use the tool holder.
When the tool is replaced, loosen the cap with a wrench to remove the chuck and tool, remove the tool, push the rod in the direction of the arrow, take it out, then you must put the other holes into a cane.
Name: NT30-ER20 milling shank
Color: sier
Material: Steel
Package Contents:
1 x CNC Milling Toolholder
Note: And avoid installing tools on the adjustment pressure cap, so as not to damage the tie rodOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Pin 21700 5000mah PANASONIC JAPAN
₫ 110.000
HOT
HOT
vòng bi các cỡ giá rẻ
₫ 5.000
HOT
Súng nước đi biển dễ thương 🎀
₫ 175.000
HOT