Dụng Cụ Bơm Nước Bằng Điện Cầm Tay
150.167
₫ 90.101
Sản phẩm Dụng Cụ Bơm Nước Bằng Điện Cầm Tay đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 150.167 xuống còn ₫ 90.101, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to xo94itop.vn Store ,We insist on the lowest price to sell the best quality items！！！Product name: Electric drill drive pump
Product packaging: carton packaging
Working temperature: 5-49℃ (41~1209F)
Tube inner diameter 15mm
Colour: Black
material: plastic
Feature:
1. Exquisite workmanship, small size, light weight, easy installation, simple use, no battery required.
2. Large flow, 1800 (m/h), stable performance and high efficiency.
3. Install all drill chucks to get a pump with electric drill.
4. Exquisite workmanship, corrosion resistance and wear resistance.
5. Compact design, easy to carry and store.
6. Very suitable for transporting light liquids such as fresh water, fresh water, sea water, oil, dilute organic solvents, pesticides and liquid fertilizers.
Features: It is installed on an electric drill and is fully automatic, corrosion-resistant, and transports water and sewage for water supply and drainage.
Things to know before buying:
1. In order to achieve the best start-up and prolong service life, add a small amount of lubricating oil to the pump inlet before use and rinse with water after each use.
2. Make sure that the inlet hose is sealed and as short as possible. The hose should not exceed 9 feet (2.75 meters).
3. Working in the temperature range of 50~49℃
4. When pumping abrasives or liquids containing solids, use a filter on the inlet pipeline to obtain a longer pump life.
5. It is recommended to install the pump on the surface for safe use.
6. Install and start the rig. Observe whether there is a certain amount of fluid in the oil inlet pipe being sucked into the pump within 15-20 seconds. If not, check whether the oil inlet pipe is correctly installed on the oil inlet pump. Don't run dry. If the pump fails to start, check whether the hose is kinked or blocked. The pump depends on whether the fluid is a pump for lubrication
7. It is recommended that the speed is 1500-3500 rpm, and the head and flow are related to the speed. The higher the speed, the higher the flow.
1500 rpm, head is about 1.5 meters, flow rate is about 15L per minute
3000 rpm, head is about 3 meters, flow is about 30L per minute
Package Included:
1 x water pump
2 x hose clamp
2 screws
2 x sh
Product packaging: carton packaging
Working temperature: 5-49℃ (41~1209F)
Tube inner diameter 15mm
Colour: Black
material: plastic
Feature:
1. Exquisite workmanship, small size, light weight, easy installation, simple use, no battery required.
2. Large flow, 1800 (m/h), stable performance and high efficiency.
3. Install all drill chucks to get a pump with electric drill.
4. Exquisite workmanship, corrosion resistance and wear resistance.
5. Compact design, easy to carry and store.
6. Very suitable for transporting light liquids such as fresh water, fresh water, sea water, oil, dilute organic solvents, pesticides and liquid fertilizers.
Features: It is installed on an electric drill and is fully automatic, corrosion-resistant, and transports water and sewage for water supply and drainage.
Things to know before buying:
1. In order to achieve the best start-up and prolong service life, add a small amount of lubricating oil to the pump inlet before use and rinse with water after each use.
2. Make sure that the inlet hose is sealed and as short as possible. The hose should not exceed 9 feet (2.75 meters).
3. Working in the temperature range of 50~49℃
4. When pumping abrasives or liquids containing solids, use a filter on the inlet pipeline to obtain a longer pump life.
5. It is recommended to install the pump on the surface for safe use.
6. Install and start the rig. Observe whether there is a certain amount of fluid in the oil inlet pipe being sucked into the pump within 15-20 seconds. If not, check whether the oil inlet pipe is correctly installed on the oil inlet pump. Don't run dry. If the pump fails to start, check whether the hose is kinked or blocked. The pump depends on whether the fluid is a pump for lubrication
7. It is recommended that the speed is 1500-3500 rpm, and the head and flow are related to the speed. The higher the speed, the higher the flow.
1500 rpm, head is about 1.5 meters, flow rate is about 15L per minute
3000 rpm, head is about 3 meters, flow is about 30L per minute
Package Included:
1 x water pump
2 x hose clamp
2 screws
2 x sh
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000