Đồng Hồ Đo Tốc Độ Chống Nước Ip65 Cho Xe Đạp
60.000
₫ 50.000
Sản phẩm Đồng Hồ Đo Tốc Độ Chống Nước Ip65 Cho Xe Đạp đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 60.000 xuống còn ₫ 50.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
NOTE:
The Speedometer I sell has “Chileaf” Logo, Others are fake!!!
Product description:
【ALL IN ONE - Functions】Measures speed, distance, and riding time, also with emergency Flashlight, and 120 DB Loud Bike Bell, which enables bicycle Tracking, Lighting and Bell Alarm during riding.Bright Screen Green Backlight LCD display with digits ensures easy reading. During day and night, gently touch on the MODE or SET to wake up the backlight screen.
【Waterproof Bicycle Light】 Bike front light is made of high quality ABS material, IPX65 rated, which means no need to release it if you get caught in the rain. The surface of piano paint technology, strong and durable. Also this rear light is IPX4 waterproof
【4 Modes of Lighting】 Long press the switch for 3 seconds, highlight,low light, main light flashes + orange auxiliary light stably, orange auxiliary light stably. And then long press the switch again for 3 seconds to close.
【5 Recording Modes】Precise measurement adjustible for viewing total distance, maximum speed, average speed, cycling time and one way record, suitable for outdoor cycling trip and bicycle training.
【120 High Decibel Horn 】Switch six sound modes in one button:chirp,tweets,whistle,trumpet,voice alerts.
How to Set:
Step 1: Set the unit --- Long press the Set Button "-“ and the Mode Button "+", the words "km/h", press the Set Button "-" to change it as m/h or not.
Step 2: Set the speed --- Press the Mode Button"+", at the same time, the number "208" will blink on the display, it means the default wheel size, the unit is CM. You could press the set button"-" to change the wheel size from 10-315 CM.
Step 3: Set the ODO --- Press the Mode Button"+", press the set button"-" to adjust ODO.
Step 4: Press the Mode Button"+". Done.
The Steps for Setting Up Safety Taillight
1.Turn the taillight counterclockwise.
2.Remove the insulation paper between the batteries.
3.Turn the taillight clockwise.
4.Press the headlight to turn on the taillight (switch mode).
Package list
1 * Bicycle headlight
1 * Bicycle tail light
2 * Silicone strap
2 * USB cable
1 * Data table code receiver
1 * sensor data of code table
2 * Rubber feet for sensors
1 * Speaker controller
4 * nylon belt
1 * User m
The Speedometer I sell has “Chileaf” Logo, Others are fake!!!
Product description:
【ALL IN ONE - Functions】Measures speed, distance, and riding time, also with emergency Flashlight, and 120 DB Loud Bike Bell, which enables bicycle Tracking, Lighting and Bell Alarm during riding.Bright Screen Green Backlight LCD display with digits ensures easy reading. During day and night, gently touch on the MODE or SET to wake up the backlight screen.
【Waterproof Bicycle Light】 Bike front light is made of high quality ABS material, IPX65 rated, which means no need to release it if you get caught in the rain. The surface of piano paint technology, strong and durable. Also this rear light is IPX4 waterproof
【4 Modes of Lighting】 Long press the switch for 3 seconds, highlight,low light, main light flashes + orange auxiliary light stably, orange auxiliary light stably. And then long press the switch again for 3 seconds to close.
【5 Recording Modes】Precise measurement adjustible for viewing total distance, maximum speed, average speed, cycling time and one way record, suitable for outdoor cycling trip and bicycle training.
【120 High Decibel Horn 】Switch six sound modes in one button:chirp,tweets,whistle,trumpet,voice alerts.
How to Set:
Step 1: Set the unit --- Long press the Set Button "-“ and the Mode Button "+", the words "km/h", press the Set Button "-" to change it as m/h or not.
Step 2: Set the speed --- Press the Mode Button"+", at the same time, the number "208" will blink on the display, it means the default wheel size, the unit is CM. You could press the set button"-" to change the wheel size from 10-315 CM.
Step 3: Set the ODO --- Press the Mode Button"+", press the set button"-" to adjust ODO.
Step 4: Press the Mode Button"+". Done.
The Steps for Setting Up Safety Taillight
1.Turn the taillight counterclockwise.
2.Remove the insulation paper between the batteries.
3.Turn the taillight clockwise.
4.Press the headlight to turn on the taillight (switch mode).
Package list
1 * Bicycle headlight
1 * Bicycle tail light
2 * Silicone strap
2 * USB cable
1 * Data table code receiver
1 * sensor data of code table
2 * Rubber feet for sensors
1 * Speaker controller
4 * nylon belt
1 * User m
Sản Phẩm Liên Quan
HOT
HOT
HOT
HOT
HOT