Đồng Hồ Đo Áp Suất Co2 Cho Bể Cá
499.000
₫ 350.000
Sản phẩm Đồng Hồ Đo Áp Suất Co2 Cho Bể Cá đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 499.000 xuống còn ₫ 350.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Up to 1500 psi (lb/sq inch).
Compact & sturdy construction.
Single gauge pressure indicator.
Compatible with various size of CO2 Cylinders.
No wrench needed, handy installation. Convenient and simple.
Usage Introduction:
Make sure that the cylinder is stationary and locked tightly.
Please do not add any lubricant.
Please do not disassemble the device.
With the check counter bubble gauge, the reading is accurate, the built-in check reverse backflow can prevent the backflow phenomenon when the cylinder pressure decreases.
Adjustment Method:
Step 1.Close CO2 gauge, install pressure reducing vae, connect equipment.
Step 2.Open the relief vae trim switch, and adjust the gas output. Smaller than required.
Step 3.Adjusting pressure reducing vae 8 hours later.
Specification:
Input pressure: 0-10mpa
Intake link: GB cylinder interface G5/8
Outgassing link: M10*1 outer filament
Output pressure: Fine tune out bubble seconds calculation
Colour:Sier
Material:Aluminum alloy
Package Contents:
1 * CO2 Pressure Gauge
1 * BubblerOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Compact & sturdy construction.
Single gauge pressure indicator.
Compatible with various size of CO2 Cylinders.
No wrench needed, handy installation. Convenient and simple.
Usage Introduction:
Make sure that the cylinder is stationary and locked tightly.
Please do not add any lubricant.
Please do not disassemble the device.
With the check counter bubble gauge, the reading is accurate, the built-in check reverse backflow can prevent the backflow phenomenon when the cylinder pressure decreases.
Adjustment Method:
Step 1.Close CO2 gauge, install pressure reducing vae, connect equipment.
Step 2.Open the relief vae trim switch, and adjust the gas output. Smaller than required.
Step 3.Adjusting pressure reducing vae 8 hours later.
Specification:
Input pressure: 0-10mpa
Intake link: GB cylinder interface G5/8
Outgassing link: M10*1 outer filament
Output pressure: Fine tune out bubble seconds calculation
Colour:Sier
Material:Aluminum alloy
Package Contents:
1 * CO2 Pressure Gauge
1 * BubblerOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000