Động Cơ Servo Mg996r Arduino Towerpro Mg995 Mg996 180 Độ
₫ 115.800
Sản phẩm Động Cơ Servo Mg996r Arduino Towerpro Mg995 Mg996 180 Độ đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
MG995 MG996R Metal Gear Servo
Features
The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec.
This high-speed standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast!
Specifications
Weight: 55 g
Dimension: 40.7 x 19.7 x 42.9 mm approx.
Stall torque: 8.5 kgf·cm (4.8 V ), 10 kgf·cm (6 V)
Operating speed: 0.2 s/60o (4.8 V), 0.16 s/60o (6 V)
Operating voltage: 4.8 V a 7.2 V
Dead band width: 5 μs
Stable and shock proof double ball bearing design
Temperature range: 0 oC – 55 oC
MG996R / MG996 Metal Gear High Torque Servo
High value, general purpose, standard size servo with high torque. Easily used with the Arduino Servo library.
Features :
Stable and Shock Proof
Coreless Motor
Metal Gears
Double Ball Bearing
Connector Wire Length 300mm (12")
Dimensions : 40mm x 19mm x 43mm (approx 1.5" x 3/4" x 1.5")
Weight : 55g (just over 2 oz)
Operating Speed : 0.17sec / 60 degrees (4.8V no load)
Operating Speed : 0.13sec / 60 degrees (6.0V no load)
Stall Torque : 9 kg-cm (180.5 oz-in) at 4.8V
Stall Torque : 12 kg-cm (208.3 oz-in) at 6V
Voltage : 4.8 - 7.2Volts
Color:Black
Connector Wire: Heavy Duty, 11.81" (300mm)
Applications: Steering system in RC toys,Robots,humanoid r
Features
The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec.
This high-speed standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast!
Specifications
Weight: 55 g
Dimension: 40.7 x 19.7 x 42.9 mm approx.
Stall torque: 8.5 kgf·cm (4.8 V ), 10 kgf·cm (6 V)
Operating speed: 0.2 s/60o (4.8 V), 0.16 s/60o (6 V)
Operating voltage: 4.8 V a 7.2 V
Dead band width: 5 μs
Stable and shock proof double ball bearing design
Temperature range: 0 oC – 55 oC
MG996R / MG996 Metal Gear High Torque Servo
High value, general purpose, standard size servo with high torque. Easily used with the Arduino Servo library.
Features :
Stable and Shock Proof
Coreless Motor
Metal Gears
Double Ball Bearing
Connector Wire Length 300mm (12")
Dimensions : 40mm x 19mm x 43mm (approx 1.5" x 3/4" x 1.5")
Weight : 55g (just over 2 oz)
Operating Speed : 0.17sec / 60 degrees (4.8V no load)
Operating Speed : 0.13sec / 60 degrees (6.0V no load)
Stall Torque : 9 kg-cm (180.5 oz-in) at 4.8V
Stall Torque : 12 kg-cm (208.3 oz-in) at 6V
Voltage : 4.8 - 7.2Volts
Color:Black
Connector Wire: Heavy Duty, 11.81" (300mm)
Applications: Steering system in RC toys,Robots,humanoid r
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000