Động Cơ Không Chổi Than Hw30a Esc Cho Máy Bay Điều Khiển Từ Xa Su27 Motor A2212 Kv1400xxd Sada
₫ 115.100
Sản phẩm Động Cơ Không Chổi Than Hw30a Esc Cho Máy Bay Điều Khiển Từ Xa Su27 Motor A2212 Kv1400xxd Sada đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Note: our products only provide product information or details, without technical support, buyers need to understand, thank you for your cooperation
Warm tip: 30a electric tape 2212 930kv 1000kv 1400kv motor, 2200kv 2450kv recommended 40a
Product specifications
1.1 output capacity: continuous current 30a, short current 40a (not less than 10 seconds)
1.2 power input: 5.6v-12.6v (2-3 lithium batteries or 5-12 nickel hydrogen/nickel cadmium batteries)
1.3 bec output: linear steady pressure mode, 2a
1.4 zui high speed: 2 pole motor 21000 turn/minute, 6 pole motor 70000 turn/minute, 12 pole motor 35000 turn/minute
1.5 size: 45mm x 24mm x 11mm
1.6 weight: 25g
Product function
-safe electrical power: no throttle rocker is in any position to start the motor immediately when it is connected to the power supply to avoid causing personal injury
-throttle travel adjustment function: suitable for different remote control oil
The difference of door stroke, improve the linearity of throttle response, have smooth, delicate speed control feel speed linear
-programming project:
Brake setting: no brake/brake, out of factory default value is no brake.
Battery type: li-xx (lithium battery)/ni-xx (nickel cadmium or nickel hydrogen) with a preset value of li-xx (lithium battery).
Low voltage protection mode: reduced power/shut down output, preset to lower power.
Low voltage protection threshold: low/medium/high, preset value is medium cut-off voltage.
When the li-xx battery is set to be used, the lithium count is automatically judged and the cut-off voltage for each battery is 2.6v, 2.85v, 3.1v, respectively, in low/medium/high circumstances.
Automatic detection of battery voltage when the ni-xx battery is set for use and the voltage of the battery is transferred to the battery, and the low/medium/high cut-off voltage is 0%, 45%, 60% (0% means no low voltage protection)
Start mode: ordinary/soft/super soft start, preset for ordinary start.
Ordinary start-up for fixed-wing, capable of quick start of motor within 0.2 seconds
Soft start/super soft start for helicopters;The initial speed of soft start and super soft start is lower, taking 1 second and 2 seconds from start to full speed, respectively, but if the throttle is closed after start-up, the restart in 3 seconds is in normal mode, so as not to cause a fallover during some stunt flight because of slow reaction.
Angle of entry: low/medium/high, preset value is middle angle.
In general, the low-angle can be adapted to more motors, but to improve gao efficiency, it is recommended that the 2-pole motor use low-angle, 6-pole motor use mid-angle.In order to improve speed, the input angle can be set to a high input angle.After the improved angular setting, the ground should be tested before flying.
Restoration of factory default value
-comprehensive protection functions:
Under-pressure protection: program settings by users
Overpressure protection: input voltage exceeding 18 volts will not be activated, automatic p
Warm tip: 30a electric tape 2212 930kv 1000kv 1400kv motor, 2200kv 2450kv recommended 40a
Product specifications
1.1 output capacity: continuous current 30a, short current 40a (not less than 10 seconds)
1.2 power input: 5.6v-12.6v (2-3 lithium batteries or 5-12 nickel hydrogen/nickel cadmium batteries)
1.3 bec output: linear steady pressure mode, 2a
1.4 zui high speed: 2 pole motor 21000 turn/minute, 6 pole motor 70000 turn/minute, 12 pole motor 35000 turn/minute
1.5 size: 45mm x 24mm x 11mm
1.6 weight: 25g
Product function
-safe electrical power: no throttle rocker is in any position to start the motor immediately when it is connected to the power supply to avoid causing personal injury
-throttle travel adjustment function: suitable for different remote control oil
The difference of door stroke, improve the linearity of throttle response, have smooth, delicate speed control feel speed linear
-programming project:
Brake setting: no brake/brake, out of factory default value is no brake.
Battery type: li-xx (lithium battery)/ni-xx (nickel cadmium or nickel hydrogen) with a preset value of li-xx (lithium battery).
Low voltage protection mode: reduced power/shut down output, preset to lower power.
Low voltage protection threshold: low/medium/high, preset value is medium cut-off voltage.
When the li-xx battery is set to be used, the lithium count is automatically judged and the cut-off voltage for each battery is 2.6v, 2.85v, 3.1v, respectively, in low/medium/high circumstances.
Automatic detection of battery voltage when the ni-xx battery is set for use and the voltage of the battery is transferred to the battery, and the low/medium/high cut-off voltage is 0%, 45%, 60% (0% means no low voltage protection)
Start mode: ordinary/soft/super soft start, preset for ordinary start.
Ordinary start-up for fixed-wing, capable of quick start of motor within 0.2 seconds
Soft start/super soft start for helicopters;The initial speed of soft start and super soft start is lower, taking 1 second and 2 seconds from start to full speed, respectively, but if the throttle is closed after start-up, the restart in 3 seconds is in normal mode, so as not to cause a fallover during some stunt flight because of slow reaction.
Angle of entry: low/medium/high, preset value is middle angle.
In general, the low-angle can be adapted to more motors, but to improve gao efficiency, it is recommended that the 2-pole motor use low-angle, 6-pole motor use mid-angle.In order to improve speed, the input angle can be set to a high input angle.After the improved angular setting, the ground should be tested before flying.
Restoration of factory default value
-comprehensive protection functions:
Under-pressure protection: program settings by users
Overpressure protection: input voltage exceeding 18 volts will not be activated, automatic p