Động Cơ Điều Khiển Micro Motor 1a Tb6612Fng L298N Drv8833
₫ 18.100
Sản phẩm Động Cơ Điều Khiển Micro Motor 1a Tb6612Fng L298N Drv8833 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
☃☃Dear friends, {forstrehhuj} has opened! ! ! Warmly welcome all of you to come and patronize. I will bring you the best shopping experience with my most sincere service! ! !☃☃
Features:
Size: 18 * 21mm
Input voltage: 2.7 V – 10.8 V
Single H-bridge output current: 1.5A, can drive two DC reduction motors.
Built in over-current protection, short-circuit protection, under voltage locking and overheating protection. Sleep mode with low power consumption.
Purpose: it can drive DC motor below 1.5A and 4-wire stepper motor.
Pin description:
Ani1: logic input control port of AO1, level 0-5V.
Ain2: AO2 logic input control port, level 0-5V.
Bni1: Bo1 logic input control port, level 0-5V.
BIN2: Bo2 logic input control port, level 0-5V.
AO1 and AO2 are 1-way H-bridge output ports connected with two pins of a DC motor.
Bo1 and Bo2 are two H-bridge output ports connected with two pins of another external direct motor.
GND: ground.
The voltage range of the VM chip and the motor is 10.5 v.
STBY: grounded or suspended chip does not work, no output, connected to 5V; level 0-5V.
NC: empty foot
Features:
Power supply voltage: VM=15V max, VCC=2.7-5.5V
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1" spaced pins
Filtering capacitors on both supply
Features:
Size: 18 * 21mm
Input voltage: 2.7 V – 10.8 V
Single H-bridge output current: 1.5A, can drive two DC reduction motors.
Built in over-current protection, short-circuit protection, under voltage locking and overheating protection. Sleep mode with low power consumption.
Purpose: it can drive DC motor below 1.5A and 4-wire stepper motor.
Pin description:
Ani1: logic input control port of AO1, level 0-5V.
Ain2: AO2 logic input control port, level 0-5V.
Bni1: Bo1 logic input control port, level 0-5V.
BIN2: Bo2 logic input control port, level 0-5V.
AO1 and AO2 are 1-way H-bridge output ports connected with two pins of a DC motor.
Bo1 and Bo2 are two H-bridge output ports connected with two pins of another external direct motor.
GND: ground.
The voltage range of the VM chip and the motor is 10.5 v.
STBY: grounded or suspended chip does not work, no output, connected to 5V; level 0-5V.
NC: empty foot
Features:
Power supply voltage: VM=15V max, VCC=2.7-5.5V
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1" spaced pins
Filtering capacitors on both supply
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000