Động Cơ Bước Tb6600 1 Axis 4a / 5a 9~40v

5A Motor Driver Controller
Descriptions:
- HY-DIV268N-5A subdivision-type two-phase hybrid stepping motor drive using DC 12 ~ 48V power supply, suitable for drive
Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive's current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase drive, high positioning accuracy. Widely used in the engraving machine, CNC machine tools, packaging machinery and other high resolution requirements on the device.

The main features
- average current control, two-phase sinusoidal current drive output
- DC 12 ~ 48V power supply, the internal integration of 12V and 5V regulator
- optically isolated signal input / output
- overvoltage, undervoltage, overcurrent, and white short-circuit protection

- Input voltage DC 12 ~ 48V input
- The input current of 1 to 5 amps, select the drive a stepper motor.
- Output current of 0.2A ~ 5A
- Temperature Operating Temperature -10 to 45 ℃; Storage temperature -40 ℃ to 70 ℃
- Humidity not condensing, not drops
- Gas prohibit combustible gas and conductive dust
- Weight 200 grams




Current setting
the semi-flow functionality
The semi-flow function is a step pulse 200ms, the driver output current is automatically reduced to the rated output current50%, used to prevent motor heating.



Package Included:
1PC*Single Axis TB6600 0.2-5A CNC Engraving Machine Stepper Motor Driver Controller
 
 
4A Motor Driver Controller
Specifications:
Supply Voltage: 9~42VDC
Max Drive Current: 4A
Chopping Frequency: 20KHZ
Features:
Bipolar constant current chopper
High-speed optocoupler signal isolation input
Electrical input signal is TTL compatible
Stationary current is automatically reduced by half

Package Included:
1PCS*4A TB6600 Stepper Motor Driver Controller 9~42V TTL 16 Micro-Step CNC 1