Động Cơ Bước Drv8825 Cho Máy In 3d Drv8825
₫ 39.700
Sản phẩm Động Cơ Bước Drv8825 Cho Máy In 3d Drv8825 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Comparative advantage over 4988:
- maximum current 2.5a.
- maximum support 32 breakdown.
3, 4 layers pcb board, heat dissipation performance is better.
- less resistance, less heat and better heat dissipation in the chip.
Parameters:
Size: 1.5mm x 2mm (same as 4988)
Driveable current: 2.5a
Breakdown: 1,1/2, 1/4, 1/8, 1/16, 1/32
Manufacturing process: smt smd machine manufacturing, non-manual welding, higher elite rate, more stable performance
Suitable for:
Need to drive stepper motor on occasion.
Is to build 3d printer, cnc, engraving machine and other essential modules.
The 3d printers supported include prusa mendel, ultimaker, printbot, makerbot, etc.
You can refer to the back arduino code to drive the motor directly.
Drv8825 features the following:
- stepping motor suitable for driving up to 8.2v~45v 2.5a;
- only simple stepping and direction control interfaces;
- six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32;
- adjustable potentiometers can adjust the maximum current output to obtain a higher stepping rate;
- automatic current attenuation mode detection/selection;
- overheat off circuit, under-pressure lock, cross current protection;
- grounded short circuit protection and load short circuit prote
- maximum current 2.5a.
- maximum support 32 breakdown.
3, 4 layers pcb board, heat dissipation performance is better.
- less resistance, less heat and better heat dissipation in the chip.
Parameters:
Size: 1.5mm x 2mm (same as 4988)
Driveable current: 2.5a
Breakdown: 1,1/2, 1/4, 1/8, 1/16, 1/32
Manufacturing process: smt smd machine manufacturing, non-manual welding, higher elite rate, more stable performance
Suitable for:
Need to drive stepper motor on occasion.
Is to build 3d printer, cnc, engraving machine and other essential modules.
The 3d printers supported include prusa mendel, ultimaker, printbot, makerbot, etc.
You can refer to the back arduino code to drive the motor directly.
Drv8825 features the following:
- stepping motor suitable for driving up to 8.2v~45v 2.5a;
- only simple stepping and direction control interfaces;
- six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32;
- adjustable potentiometers can adjust the maximum current output to obtain a higher stepping rate;
- automatic current attenuation mode detection/selection;
- overheat off circuit, under-pressure lock, cross current protection;
- grounded short circuit protection and load short circuit prote
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000