Động cơ bước Arduino Gy-4988 A 4988 dành cho máy in 3D
₫ 33.300
Sản phẩm Động cơ bước Arduino Gy-4988 A 4988 dành cho máy in 3D đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
A 4988 is a complete microstep motor drive with built-in converters that are easy to operate.The product can operate double-pole stepper motor in full, half, 1/4, 1/8 and 1/16 stepper mode, and the output drive performance can reach 35 v and 2 a.A4988 includes a fixed shutdown time current regulator, which can work in slow or mixed decay mode.Converter is the key to easy implementation of a 4988.As long as a pulse is fed into the stepper input, the motor can be driven to microstep.No phase sequence table, high frequency control line or complex interface programming is required.The a4988 interface is well suited for complex microprocessors that are not available or overloaded.
At microstep operation, the chopper control in a4988 automatically selects current attenuation mode (slow or mixed).In hybrid attenuation mode, the device is initially set to rapidly decay during part of the fixed downtime and then at a slower rate during the remainder of the downtime.The hybrid damping current control scheme can reduce the noise of audible motor, increase stepping accuracy and reduce power consumption.Provide internal synchronous rectifier control circuit to improve power consumption during pulse width modulation (pwm) operation.The internal circuit protection includes: overheat shutdown with lag, underpressure lock (uvlo) and cross current protection.There is no need for special electrical sorting.
Characteristics
Low rds (open) output
Detection/selection of automatic current attenuation mode
Hybrid and slow current attenuation mode
Synchronous rectifier for low power dissipation
Internal uvlo
Cross current protection
3.3 and 5v compatible logic power supply
Overheat off circuit
Grounding short circuit protection
Loading short circuit protection
Five optional stepping modes: full, 1/2, 1/4, 1/8 and
At microstep operation, the chopper control in a4988 automatically selects current attenuation mode (slow or mixed).In hybrid attenuation mode, the device is initially set to rapidly decay during part of the fixed downtime and then at a slower rate during the remainder of the downtime.The hybrid damping current control scheme can reduce the noise of audible motor, increase stepping accuracy and reduce power consumption.Provide internal synchronous rectifier control circuit to improve power consumption during pulse width modulation (pwm) operation.The internal circuit protection includes: overheat shutdown with lag, underpressure lock (uvlo) and cross current protection.There is no need for special electrical sorting.
Characteristics
Low rds (open) output
Detection/selection of automatic current attenuation mode
Hybrid and slow current attenuation mode
Synchronous rectifier for low power dissipation
Internal uvlo
Cross current protection
3.3 and 5v compatible logic power supply
Overheat off circuit
Grounding short circuit protection
Loading short circuit protection
Five optional stepping modes: full, 1/2, 1/4, 1/8 and
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000