Động Cơ Bước 12v 80mm Kèm Động Cơ Trượt Cho Máy Khắc Laser Diy
674.100
₫ 338.800
Sản phẩm Động Cơ Bước 12v 80mm Kèm Động Cơ Trượt Cho Máy Khắc Laser Diy đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 674.100 xuống còn ₫ 338.800, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Made of fine quality material, practical, easy to install and use, wide application range, has a long service life.
Features:
Made of fine quality steel, wear resistant, high hardness, has a long service life.
Widely used for small devices such as medical equipment, laser engraving machine, etc.
DIY installation process can improve your hands-on ability.
The motor needs a A4988 driver (not included) to drive, and the motor can not directly connect to the power.
The maximum linear speed is 25mm per second.
Specifications:
Material: steel
Color: silver
Model: D8-MOTOR80
Rated voltage: 9-12V
Thread rod diameter: 3mm / 0.1in
Thread rod length: 90mm / 3.5in
Slider block stroke: 80mm / 3.1in
Drive mode: bipolar drive
Thread rod pitch: ±0.5mm / ±0.02in (Moving 0.025mm for one step, can use microstep driver if needs smaller)
Drive voltage: 12V DC
Current per phase: 800 ma/phase
Coil resistance: 15 10%Ω/phase
No.of phases: 2 phases
Step angle: 18 ./step
Excitation method: 1-2 phase excitation
Pull-out thrust: 500g above at 125pps
Max response frequency: 1600 pps above
Max starting frequency: 1100 pps above
Insulation class: class E
Insulation strength: 100V AC one second
Insulation resistance: 50M DC 500V
Operating temperature: 0°C~+55°C
Motor surface temperature: 80°C
Item size: 105 * 15mm / 4.1 * 0.6in
Item weight: 46g / 1.6ounce
Package size: 130 * 35 * 35mm / 5.1 * 1.4 * 1.4in
Package weight: 55g / 1.9ounce
Note:
The motor needs to be driven by the driver, not directly connected to the power.
Package List:
1 * Motor with Linear
Features:
Made of fine quality steel, wear resistant, high hardness, has a long service life.
Widely used for small devices such as medical equipment, laser engraving machine, etc.
DIY installation process can improve your hands-on ability.
The motor needs a A4988 driver (not included) to drive, and the motor can not directly connect to the power.
The maximum linear speed is 25mm per second.
Specifications:
Material: steel
Color: silver
Model: D8-MOTOR80
Rated voltage: 9-12V
Thread rod diameter: 3mm / 0.1in
Thread rod length: 90mm / 3.5in
Slider block stroke: 80mm / 3.1in
Drive mode: bipolar drive
Thread rod pitch: ±0.5mm / ±0.02in (Moving 0.025mm for one step, can use microstep driver if needs smaller)
Drive voltage: 12V DC
Current per phase: 800 ma/phase
Coil resistance: 15 10%Ω/phase
No.of phases: 2 phases
Step angle: 18 ./step
Excitation method: 1-2 phase excitation
Pull-out thrust: 500g above at 125pps
Max response frequency: 1600 pps above
Max starting frequency: 1100 pps above
Insulation class: class E
Insulation strength: 100V AC one second
Insulation resistance: 50M DC 500V
Operating temperature: 0°C~+55°C
Motor surface temperature: 80°C
Item size: 105 * 15mm / 4.1 * 0.6in
Item weight: 46g / 1.6ounce
Package size: 130 * 35 * 35mm / 5.1 * 1.4 * 1.4in
Package weight: 55g / 1.9ounce
Note:
The motor needs to be driven by the driver, not directly connected to the power.
Package List:
1 * Motor with Linear
Sản Phẩm Liên Quan
HOT
Túi hút bụi thay thế cho máy hút bụi
₫ 11.931
HOT
MÁY HÚT BỤI MINI CẦM TAY 2 CHIỀU VACUUM
₫ 360.000