DJI SONY Dây Cáp Điều Khiển Camera Từ Xa Chuyển Đổi Usb-C Sang 2 / Rs2 Rss / A7R Ii / A7 / A7S / A7 / Ii / A7S / Ii I / A7 / Ii / Ii I

Introduction:
This RSS cable connects the camera control port of Ronin-SC to the Multi Port on a for S0NY camera to control the camera
Lightweight and Durable, easy to carry and store
The camera control cable may enable the stabilizer to control compatible cameras to: Capture photo; Start/stop recording video; Zoom control (digital or optical); Trigger auto focus
Note: Above functions depends on the camera and stabilizer, not our cables. Only 'Capture photo' & 'Start/Stop Recording' functions works for some old cameras.

Specification:
Color: Black
Material: PVC
Length: About 11.8 inch (30cm)
One End: USB-C, also called Type-C
Another End: Multi-USB, also called S2 as popular abbr in business

How to use?
-Connect the cable to Camera and Stabilizer
-Turn on the stabilizer and select specified camera in the setting
-Switch on the camera
-If not work, re-start the stabilizer first and turn on the camera
-When using a lens without the Power Zoom function, please activate the camera's digital zoom function to control the digital Zoom.
Specific setting method: Select menu--select settings--select zoom settings--select digital zoom.

How to operate (Press the red button on the stabilizer)
-Focus: half-press of the red button to activate focus
-Shoot: Press the red button for 2 seconds means photography one time
-Making video: click red button and then let go on the stabilizer to start recording

Suitable for
For DJI Ronin-SC 2 stabilizer
Used to control for S0NY Cameras with Multi-USB port, such as RX100 V, A6000, A6300, A6400, A6500, A9, A7, A7S, A7/A7S/A7R II, A7/A7R III, A7R IV, A7S III, A9 II, etc.

Package Include
1 X Control Cable

Note:
-Some cameras may not be able to shoot when proper focus has not been achieved due to focus speed or in a complex environment, such as low light situations. If there's an issue with the shutter or rec button not responding properly in these situations, manual focus mode is recommended.
-When using intelligent functions such as Time-lapse, it is recommended to turn off the camera's auto review (S0NY) to reduce system latency.
-After connecting with a S0ny camera using the cable, if you need to swap to a camera of other manufacturers then a gimbal reboot is requ