Máy Kiểm Tra Nguồn Điện Màn Hình Lcd Cho Máy Tính
107.000
₫ 74.000
Sản phẩm Máy Kiểm Tra Nguồn Điện Màn Hình Lcd Cho Máy Tính đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 107.000 xuống còn ₫ 74.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Now the number of power output groups is increasing, while one of the problems arises, the computer system hardware may not work well or even burn out the accessories.
The power tester just need to connect the ATX power supply connector to simply and intuitively know if the power supply output is normal.
The JW energy tester is a powerful power testing device.
It can detect ATX, BTX, ITX, TFX computer power supply, and can display the voltage value LCD and PG. It can quickly detect computer power and facilitate the instrument.
Operation Manual:
1. Insert the 24PIN and P4, P6 or P8 power supply (the 3 plugs must insert at least one, otherwise + 12V2 has no voltage exposure) connect to the corresponding location of the power tester.
2. Turn on the power supply at the same time "drop" sound twice boot sound, each value were not flicker, indicate the power supply output voltage is normal.
3. If a voltage signal is not detected, or the detected voltage is beyond normal range, the bell will give a warning for a long time, and the corresponding voltage or PG value will flash. This indicates that the power supply is a power failure.
Input Voltage: 20 / 24pin (ATX Connector)
Voltage detection: + 12 v, -12 v, + 5 v, -5 v, + 3.3 v, 5 v Stand by (SB) 12 v Good power.
Connection Ports: Floppy Disk, HDD, CD-ROM, SATA, 4-Pin (P4), 8-Pin (Dual-CPU), 6-Pin (PCI-Express)
Color: blue
Material: plastic
Size: 6.2*9.3*2cm
Package Contents:
1 * Power tester (with opp bag)Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
The power tester just need to connect the ATX power supply connector to simply and intuitively know if the power supply output is normal.
The JW energy tester is a powerful power testing device.
It can detect ATX, BTX, ITX, TFX computer power supply, and can display the voltage value LCD and PG. It can quickly detect computer power and facilitate the instrument.
Operation Manual:
1. Insert the 24PIN and P4, P6 or P8 power supply (the 3 plugs must insert at least one, otherwise + 12V2 has no voltage exposure) connect to the corresponding location of the power tester.
2. Turn on the power supply at the same time "drop" sound twice boot sound, each value were not flicker, indicate the power supply output voltage is normal.
3. If a voltage signal is not detected, or the detected voltage is beyond normal range, the bell will give a warning for a long time, and the corresponding voltage or PG value will flash. This indicates that the power supply is a power failure.
Input Voltage: 20 / 24pin (ATX Connector)
Voltage detection: + 12 v, -12 v, + 5 v, -5 v, + 3.3 v, 5 v Stand by (SB) 12 v Good power.
Connection Ports: Floppy Disk, HDD, CD-ROM, SATA, 4-Pin (P4), 8-Pin (Dual-CPU), 6-Pin (PCI-Express)
Color: blue
Material: plastic
Size: 6.2*9.3*2cm
Package Contents:
1 * Power tester (with opp bag)Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1