Đèn Ngủ Hình Mặt Trăng 3D Có Thể Sạc Được Trang Trí Phòng Ngủ
₫ 64.880
Sản phẩm Đèn Ngủ Hình Mặt Trăng 3D Có Thể Sạc Được Trang Trí Phòng Ngủ đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Name:3D printing touch moon light
Materials:PLA plastic
Specifications:please refer to thr diameter of the product
Brightness: Stepless Adjustment
Color temperature: 3000K / 6000K
Battery capacity:400MHA
Charging time: 6 - 8 hours
Working time: 3-8hours ( depends on brightness )
Charging mode:USB DC5V
Charging current:1A
Using environmrnt:0-40<75%
How to use
1. Touch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellow.
2. Long press the metal ring to adjust the brightness, and it has the brightness memory function.
3. If your hand is too dry or the temperature is too low, the light may not respond.
4. The white light will not shine when power is low.
5. Insert the DC connector into the metal ring at the bottom of the moon lamp to charge, the red light is always on during the charging.
6. The red light will automatically turn off when fully charged.
Notice:
1.When charging,the ball becomes red,full,and then extinguished;
2.Because the installation of the circuit required,the sphere edge will have seam(as shown).
3.3D priting forming principle causes the object surface to have the contour line phenomenon.
4.This product does not have waterproof ability,not strong acid,alkali.
5.This product can not be strongly hit or fall from high pl
Materials:PLA plastic
Specifications:please refer to thr diameter of the product
Brightness: Stepless Adjustment
Color temperature: 3000K / 6000K
Battery capacity:400MHA
Charging time: 6 - 8 hours
Working time: 3-8hours ( depends on brightness )
Charging mode:USB DC5V
Charging current:1A
Using environmrnt:0-40<75%
How to use
1. Touch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellow.
2. Long press the metal ring to adjust the brightness, and it has the brightness memory function.
3. If your hand is too dry or the temperature is too low, the light may not respond.
4. The white light will not shine when power is low.
5. Insert the DC connector into the metal ring at the bottom of the moon lamp to charge, the red light is always on during the charging.
6. The red light will automatically turn off when fully charged.
Notice:
1.When charging,the ball becomes red,full,and then extinguished;
2.Because the installation of the circuit required,the sphere edge will have seam(as shown).
3.3D priting forming principle causes the object surface to have the contour line phenomenon.
4.This product does not have waterproof ability,not strong acid,alkali.
5.This product can not be strongly hit or fall from high pl
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000