Đèn Led Sử Dụng Năng Lượng Mặt Trời Gắn Khe Điều Hòa Xe Hơi

- lithium battery built-in, the product uses a large-capacity lithium battery, durable.

- no wire connection, just to tear the bottom of the product adhesive stick to the car, once and for all.

- the brightness of the light is close to the tail light. the led light is a 15x15-chip core, high brightness, good stability and good warning when driving.

- shell paint, original car same color paint, basically car-specific, the product surface has a very high level of cleanness, as the original car paint corrosion, aging resistance.
- automatic opening of the warning system, with high sensitivity vibration sensor and sensor system, which flickers in the dark environment while driving.

- intelligent shut-off system, with 14-foot single chip microcomputer, double-circuit control, with a delay-closing system, continued flashing during parking and red light, and automatic closure after 60 seconds without vibration

- one-piece molding design with excellent waterproofing performance, not to be taken off in rain or car washing.

Method of use:

- installlation location: it is recommended that the product be installled in the rear trunk and on both sides of the body. the solar panel can absorb sunlight easily and remind the neighboring car to pay attention to the distance

- surface cleaning: paste the surface to maintain absolute cleanliness and dryness.

- product paste: the product must be placed in the required installlation before paste, determine the location of the product installlation, then tear off the protective film for paste.It's better to bake double - sided glue with a wind tube.The operation should avoid contact between the finger and the adhesive surface, the product after paste must press hard to ensure full contact with the adhesive surface.

- do not wash your car or drive at high speed immediately after posting. it will take at least two days to get the best adhesion without contact with water and larger