deceble HW-822 FT232H High Speed USB to JTAG UART FIFO FT1248 SPI I2C Board Module

Dear, welcome to Deceble, where you can find the latest season's products. We also provide 6420H online Q&A. For product details, please read on~

HW-822 FT232H High Speed Multifunction USB to JTAG UART FIFO FT1248 SPI I2C Board Module
Description:
The module can realize USB to multiple interfaces: USB to RS232 / RS422 / RS485; USB to FIFO; USB to FT1248; USB to JTAG; USB to SPI; USB to I2C; USB to Bit-Bang; USB to fast serial optical Interface; USB to CPU target interface (as memory).

Feature:
Can be configured to form USB to serial port, parallel port through configuration
The chip can handle the complete USB protocol without the need to program the chip with USB protocol
Compatible with USB 2.0 high speed (480Mb) and full speed (12Mb)
With multi-protocol synchronous serial engine (MPSSE), refers to USB to JTAG, I2C, SPI or bit-bang
UART transmission data rate is up to 12M baud (baud). (The RS232 data rate limit is determined by the external level converter)
USB to asynchronous 245 FIFO mode, transfer data rate up to 8Mbyte/s
USB to synchronous 245 parallel FIFO mode, transfer rate up to 40Mbyte/s
Support half-duplex, bidirectional data bus, FT1248 interface with configurable width (1,2,4 or 8 bits wide)
Receive and send signal indicator
Use the external EEPROM to configure the mode and USB description characters through the USB interface.
Configurable I/O drive strength (4, 8, 12 or 16mA) and slew rate.
Lower USB operating current and pause current
3.3V I/O interface (+ 5V withstand voltage)

Specification:
Operating temperature range: -40°C to +85°C
Product size: 58*29*5mm
Product weight: 8g
Packing size: 70*50*10mm
Package weight: 10g

Note:
There may be slight size deviations due to manual measurement, different measuring methods and tools.
The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.


Included:

1 X Board
2 X 10-Pin Headers
1 X 4-Pin He